![](/images/new-backgrounds/1048600/4860071x1.webp)
Operating Other Manufacturers’ Video Equipment
To change the transmission signals for operating a VCR
1Press and hold STANDBY/ON VCR.
2Press VCR.
3Enter manufacturer’s codes using buttons 1 – 9, and 0.
4Release STANDBY/ON VCR.
Now, you can perform the following operations on the VCR.
STANDBY/ON |
| VCR Turn on or off the VCR. |
VCR CH +/– |
| Change the channels. |
|
|
|
After pressing VCR, you can perform the following operations on the VCR:
To change the transmission signals for operating a DVD player
1Press and hold STANDBY/ON DVD.
2Press DVD.
3Enter manufacturer’s codes using buttons 1 – 9, and 0.
4Release STANDBY/ON DVD.
Now, you can use the following buttons on the DVD player.
3Start playback.
7Stop playback.
¢Skip to the beginning of the next chapters.
4Return to the beginning of the current (or previous) chapters.
8 Pause playback. To release, press 3.
3 | Start playback. |
FF | Fastwind a tape. |
|
|
REW | Rewind a tape. |
|
|
7 | Stop playback or recording. |
|
|
8 | Pause playback. To release, press 3. |
|
|
REC PAUSE Press this button to enter recording pause.
Then press 3 to start recording.
DVD menu operations
After pressing DVD, you can use the following buttons for DVD menu operations:
TEST | FRONT L FRONT R |
12 3
| CENTER | SUBWFR |
4 | 5 | 6 |
MENU | SURR L | SURR R |
7/P | 8 | 9 |
ENTER | LEVEL | |
10 | 0 | 10 |
RETURN TA/NEWS/INFO 100
Note:
Refer also to the manual supplied with your VCR.
5Try to operate your VCR by pressing
STANDBY/ON
VCR.
When your VCR turns on or off, you have entered the correct codes.
If more than one code is listed for your brand of VCR,
try each one until the correct one is entered.
Manufacturers’ codes for VCR
Manufacturer | Codes |
JVC | 01*, 02, 03 |
Emerson | 10, 22 |
Gold Star | 11 |
Hitachi | 04 |
Mitsubishi | 12 |
NEC | 21 |
Panasonic | 07, 13 |
Philips | 09 |
RCA | 05, 06 |
Samsung | 20 |
Sanyo | 17, 18, 19 |
Sony | 14, 15, 16 |
Zenith | 08 |
*“01” is the initial setting.
MENU Display or hide the menu screen.
5/∞/3/2 Select an item on the menu screen.
ENTER (10) Enter a selected item.
5Try to operate your DVD player by pressing
STANDBY/ON
DVD.
When your DVD player turns on or off, you have entered the correct codes.
Manufacturers’ codes for DVD player
Manufacturer | Codes |
JVC | 01* |
Panasonic | 02 |
Philips | 04 |
Pioneer | 03 |
Sony | 05 |
Toshiba | 06 |
Yamaha | 07 |
*“01” is the initial setting.
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
33