Specifications, Amplifier, FM tuner IHF, AM MW/LW tuner

Specifications

Output Power

At Stereo operation:

Front channels: 100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no more than 0.9% total harmonic distortion. (IEC268-3/DIN)

At Surround operation:

Front channels: 100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no more than 0.8% total harmonic distortion.

Center channel: 100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than 0.8% total harmonic distortion.

Rear channels: 100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no more than 0.8% total harmonic distortion.

Audio

Audio Input Sensitivity/Impedance (1 kHz): CD, TAPE/CDR, TV SOUND, VCR, DVD:

220 mV/47 kΩ

Audio Input (DIGITAL IN)* :

Coaxial: DIGITAL 1 (DVD): 0.5 V(p-p)/75 Ω

Optical: DIGITAL 2 (CD): –21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:

TAPE/CDR, VCR: 220 mV

Signal-to-Noise Ratio (’66 IHF/DIN): CD, TAPE/CDR, TV SOUND, VCR, DVD:

87 dB/67 dB

Frequency Response (8 Ω):

CD, TAPE/CDR, TV SOUND, VCR, DVD: 20 Hz to 20 kHz (±1 dB)

Tone Control:

Bass (100 Hz): ±10 dB

Treble (10 kHz): ±10 dB

Video

Video Input Sensitivity/Impedance:

Composite video: VCR, DVD: 1 V(p-p)/75 Ω

Video Output Level:

Composite video: VCR, MONITOR OUT:

1 V(p-p)/75 Ω

Synchronization: Negative

Signal-to-Noise Ratio: 45 dB

Tuning Range: 87.50 MHz to 108.00 MHz

Usable Sensitivity: Monaural: 17.0 dBf (1.95 µV/75 Ω)

50 dB Quieting Sensitivity:
Monaural:		21.3 dBf (3.2 µV/75	Ω)
Stereo:		41.3 dBf (31.5 µV/75	Ω)
Signal-to-Noise Ratio (IHF-A weighted):
Monaural:		78 dB at 85 dBf
Stereo:		73 dB at 85 dBf
Total Harmonic Distortion:
Monaural:		0.4% at 1 kHz
Stereo:		0.6% at 1 kHz
Stereo Separation at REC OUT: 35 dB at 1 kHz
Alternate Channel Selectivity:		60 dB: (±400 kHz)
Frequency Response:		30 Hz to 15 kHz: (+0.5 dB, –3 dB)
AM (MW/LW) tuner
Tuning Range: MW:		522 kHz to 1 629 kHz
LW:		144 kHz to 288 kHz
Usable Sensitivity:	Loop antenna: 400 µV/m (MW)
Signal-to-Noise Ratio:		50 dB (100 mV/m)
General
Power Requirements: AC 230V , 50 Hz
Power Consumption: 200 W (at operation)
	2 W (in standby mode)
Dimensions (W x H x D): 435 mm x 146.5 mm x 416 mm
	(17 3/16 in. x 5 13/16 in. x 16 7/16 in.)
Mass:	8.6 kg (19.0 lbs)

Designs & specifications are subject to change without notice.