Setting the Speakers for the DSP Modes

To obtain the best possible surround sound of the DSP (Digital Signal Processor) modes (see page 18), you have to register the information about the speakers arrangement after all connections are completed.

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Front, Center, and Rear Speaker Setting

Register the sizes of all the connected speakers.

•When you change your speakers, you need to register the information about the speakers again.

Center Delay Time Setting

Register the delay time of the sound from the center speaker, comparing to that of the sound from the front speakers.

If the distance from your listening point to the center speaker is equal to that to the front speakers, select 0 msec. As the distance to the center speaker becomes shorter, the delay time increases .

•1 msec increase (or decrease) in delay time corresponds to 11 13/16 inches (30 cm) decrease (or increase) in distance.

•When shipped from the factory, delay time is set to 0 msec.

On the front panel ONLY:

1. Press SETTING repeatedly until

ST SETTING

 

“CENTER DELAY” appears on

 

 

 

 

 

 

the display.

 

 

The display changes to show the current setting.

English

On the front panel ONLY:

1. Press SETTING repeatedly until

T SETTING

 

“FRONT SPK” (Front Speaker),

 

 

 

 

 

 

“CENTER SPK” (Center Speaker), or “REAR SPK” (Rear Speaker) appears on the display.

The display changes to show the current setting.

2. Press CONTROL UP 5/DOWN ° CONTROL

DOWN UP

2.Press CONTROL UP 5/DOWN ° to select the delay time of the center speaker output.

•Pressing CONTROL UP 5 increases the delay time from 0 msec (“C_DELAY 0MS”) to 5 msec (“C_DELAY 5MS”).

•Pressing CONTROL DOWN °decreases the delay time from 5 msec (“C_DELAY 5MS”) to 0 msec (“C_DELAY 0MS”).

CONTROL

DOWN UP

to select the appropriate item about the speaker selected in the above step.

•Each time you press the button, the display changes to show the following:

LARGESMALL NO

LARGE: Select this when the speaker size is relatively large.

SMALL: Select this when the speaker size is relatively small.

NO: Select this when you have not connected a speaker. (Not selectable for the front speakers)

3.Repeat steps 1 and 2 to select the appropriate items for the other speakers.

Notes:

•Keep the following comment in mind as reference when adjusting.

–If the size of the cone speaker unit built in your speaker is greater than 4 3/4 inches (12 cm ), select “LARGE,” and if it is smaller than 4 3/4 inches (12 cm ), select “SMALL.”

•If you have selected “NO” for the subwoofer setting, you can only select “LARGE” for the front speaker setting.

•If you have selected “SMALL” for the front speaker setting, you cannot select “LARGE” for the center and rear speaker settings.

Note:

You cannot adjust the center delay time when you have set “CENTER

SPK” to “NO.”

Rear Delay Time Setting

Register the delay time of the sound from the rear speakers, comparing to that of the sound from the front speakers.

If the distance from your listening point to the rear speakers is equal to that to the front speakers, select 0 msec. As the distance to the rear speakers becomes shorter, the delay time increases.

•1 msec increase (or decrease) in delay time corresponds to 11 13/16 inches (30 cm) decrease (or increase) in distance.

•Rear delay time for Dolby Digital and DTS Digital Surround is to be set to 5 msec.

•When shipped from the factory, delay time is set to 5 msec.

On the front panel ONLY:

1. Press SETTING repeatedly until

ST SETTING

 

“REAR DELAY” appears on the

 

 

 

 

 

 

display.

 

 

The display changes to show the current setting.

2. Press CONTROL UP 5/DOWN ° CONTROL

DOWN UP

to select the delay time of the rear speaker output.

•Pressing CONTROL UP 5 increases the delay time from 0 msec (“R_DELAY 0MS”) to 15 msec (“R_DELAY 15MS”).

•Pressing CONTROL DOWN °decreases the delay time from 15 msec (“R_DELAY 15MS”) to 0 msec (“R_DELAY 0MS”).

Note:

You cannot adjust the rear delay time when you have set “REAR SPK”

to “NO.”

12

Page 14 Page 16
Page 15
Image 15
JVC RX-6010VBK Setting the Speakers for the DSP Modes, Center Delay appears on Display, Rear Delay appears on Display
Page 14 Page 16

RX-6010VBK specifications

The JVC RX-6010VBK is a standout receiver that combines advanced audio technologies with user-friendly features, making it a popular choice for home theater enthusiasts and casual listeners alike. This versatile receiver is designed to deliver outstanding sound performance while providing a host of connectivity options to accommodate various devices.

One of the primary features of the RX-6010VBK is its high powered amplification system, delivering up to 100 watts per channel, which ensures that audio playback remains dynamic and clear, regardless of volume levels. The receiver supports a range of audio formats, including Dolby Digital, DTS, and PCM, enabling it to reproduce surround sound experiences that immerse listeners in their favorite films and music.

The RX-6010VBK is equipped with a sophisticated digital signal processor (DSP) that enhances sound quality by optimizing audio signals for different types of content. This means that whether you're watching an action-packed movie or enjoying a soft ballad, the receiver adjusts the audio output to provide the best possible listening experience.

Connectivity is another highlight of the JVC RX-6010VBK. It features multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. With support for 4K video upscaling, the receiver ensures that users can enjoy high-definition content with stunning clarity and detail. Additionally, the receiver includes composite and component video inputs, ensuring compatibility with older devices.

The user interface of the RX-6010VBK is intuitive and easy to navigate. The front panel features a clear display and straightforward controls, while a remote control is also included, making it convenient to adjust settings from a distance. The receiver's setup process is simplified by an on-screen graphical interface, allowing users to get started quickly.

One of the more advanced technologies included in the RX-6010VBK is its room calibration feature. This technology uses a built-in microphone to analyze the acoustics of your room, automatically adjusting the audio output to compensate for the unique characteristics of the space. This results in a balanced sound that is tailored to your listening environment.

In terms of aesthetics, the JVC RX-6010VBK boasts a sleek black finish that fits well with modern home entertainment systems. Its compact design makes it easy to integrate into any setup without taking up excessive space.

Overall, the JVC RX-6010VBK receiver stands out as an excellent option for anyone looking to elevate their audio experience. Its combination of powerful amplification, advanced processing technologies, and comprehensive connectivity options make it a valuable addition to any home theater setup. Whether you are a casual viewer or a serious audiophile, the RX-6010VBK is sure to deliver the performance you desire.
Top Page Image Contents