JVC RX-888RBK manual Press %/ Þ/ @/ #to adjust the SEA mode as you want, To Tuner

English

4. Press %/ Þto move to “SEA ADJUST.”

The SEA ADJUST menu appears.

5.Press %/ Þ/ @/ #to adjust the SEA mode as you want.

SEA ADJUST

SEA USERMODE

100 1k 10kHz

SET:MEMORY

“LFE ATT.”:	Set the low frequency effect attenuator
	level (see page 15).
“COMP.”:	Set the dynamic range compression
	(see page 15).
“DIGITAL 1/2/3”:	Set the digital input terminal
	(see page 13).
“FL DISP.”:	Shows the disc text information on the
	display (see page 13).

@/ # : Select the frequency ranges.

%/ Þ: Adjust the frequency levels.

6.Press SET to store the setting into the SEA USERMODE.

•If you press EXIT, without pressing SET in this step, you can return to the SEA menu. (The adjustment you have made is active but not stored.)

7.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Setting the Basic Setting Items (Also see

pages 12 – 15)

Notes:

*Not adjustable when “CENTER SPK” is set to “NONE” (see page 14).

**Not adjustable when “REAR SPK” is set to “NONE” (see page 14).

4.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Operating the Tuner (Also see pages 17 and 18)

1. Press MENU.

The MAIN MENU appears on the TV.

• Pressing one of the % / Þ / @/ #buttons also displays the

1. Press MENU.

The MAIN MENU appears on the TV.

• Pressing one of the %/ Þ / @/ #buttons also displays the

MAIN MENU.

2. Press %/ Þto move

to “TUNER

TUNER CONTROL

MAIN MENU.

2.Press %/ Þto move to “SETTING,” then

press @/ #.

SETTING 1
SUBWOOFER		: NO
FRONT	SPK	: LARGE
CENTER SPK		: SMALL
REAR	SPK	: LARGE

CONTROL,” then

press @/ #.

The TUNER CONTROL menu appears.

PRESET CH : 1

BAND :FM FREQUENCY : 87.50MHz

FM MODE :AUTO

PRESET MEMORY

:OPERATE

The SETTING 1 or SETTING 2 menu appears.

CNTR	DELAY	: 3msec
REAR	DELAY	: 5msec
CROSSOVER		:100Hz
	NEXT	PAGE

3. Press %/ Þto move to the item you want to set or adjust, then press @/ #.

3.Press %/ Þto move to the item you want to set or adjust, then press

@/ #.

•To go to the SETTING 2

menu, move to “NEXT PAGE,” then press @/ #.

•To go back to the SETTING

1 menu, move to “PREVIOUS PAGE,” then press @/ #.

:ENTER

SETTING 2

LFE ATT. : 0dB

COMP. : OFF

DIGITAL 1 : DBS

DIGITAL 2 : CD

DIGITAL 3 : MD

FL DISP. : NORMAL

PREVIOUSPAGE

:ENTER

On the TUNER CONTROL menu, you can do the following:

“PRESET CH”:	Select a preset channel station.
“BAND”:	Select the band.
“FREQUENCY”:	Tune in a station manually.
“FM MODE”:	Select the FM reception mode.*

“PRESET MEMORY”: See “Storing the Preset Stations” on the next page.

Note:

* Not displayed when an AM (MW/LW) station is selected.

4. When you finish, press EXIT repeatedly until the

On the SETTING 1 and 2 menus, you can do the following:

“SUBWOOFER”:	Set the subwoofer information (see
	page 12).
“FRONT SPK”:	Set the front speaker information (see
	page 14).
“CENTER SPK”:	Set the center speaker information (see
	page 14).
“REAR SPK”:	Set the rear speaker information (see
	page 14).
“CNTR DELAY”:	Adjust the delay time of the center
	speaker output (see page 14). *
“REAR DELAY”:	Adjust the delay time of the rear
	speaker output (see page 14). **
“CROSSOVER”:	Set the crossover frequency
	(see page 15).

menu disappears from the TV.

37