About video signal conversion
This receiver can convert video signals. See the table below about video signal conversion.
| Video Input | Converted |
| Video Output | |||
|
|
|
|
|
|
|
Component |
|
|
|
|
| Component |
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Video (composite) |
|
|
|
|
| Video (composite) |
|
|
|
|
| ||
|
|
|
|
|
|
|
To convert composite video and
•If using composite video cable for connecting to the video input and using
•Pictures may be distorted if the signals are converted. If this happens, connect the playback source component and TV using the cords of the same type.
•Incoming signal of component can be emitted only through the component output jacks.
Digital connection
This receiver is equipped with three DIGITAL IN
To reproduce the digital sound, use the digital connection in addition to the analog connection methods described on pages 7 to 9.
Digital coaxial cable (not supplied)Digital optical cable (not supplied)Turn off all components before making connections.
•When you connect other components, refer also to their manuals.
When the component has a digital coaxial output terminal, connect it to the 1(DVR/DVD) terminal, using a digital coaxial cable (not supplied).
DIGITAL IN
1(DVR/DVD) 2(DBS) 3(VCR)
When the component has a digital optical output terminal, connect it to the 2(DBS) or 3(VCR) terminal, using a digital optical cable (not supplied).
Before connecting a digital optical cable, unplug the protective plug.NOTES
•When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components:
| – 1(DVR/DVD): | For DVD recorder or DVD player |
| – 2(DBS): | For DBS tuner |
| – 3(VCR): | For VCR |
If you connect other components, change the digital input (DIGITAL IN) terminal setting correctly. See “Setting the digital input (DIGITAL IN)
•Select the correct digital input mode. See “Selecting the analog or digital input mode” on page 12.
•When you want to operate the connected component (except DBS tuner) using the AV COMPU LINK remote control system (see pages 35 and 36), connect them also as described on pages 7 to 9.
Connecting the power cordWhen all the audio/video connections have been made, connect the AC power plug to the wall outlet. Make sure that the plugs are inserted firmly. The standby lamp lights in red.
CAUTIONS:
•Do not touch the power cord with wet hands.•Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other accidents.
•If the cord is damaged, consult a dealer and have the power cord replaced with a new one.
NOTES
•Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference.
•The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases:
–When you unplug the power cord.–When a power failure occurs.•When you unplug the power cord with the receiver on and connect the power cord again, the receiver enters standby mode.
10