Tuning in to channels

From the remote control ONLY:

7Channel SearchYou can search and tune in to all channels.1Press XM to select “XM” as the source.

2Press repeatedly or hold CHANNEL +/– until the desired channel number appears on the display.

•Pressing (or holding) CHANNEL + increases the channel number.•Pressing (or holding) CHANNEL – decreases the channel number.

NOTE

While searching, the invalid and unsubscribed channels are skipped.7Category Search

You can select the channel category and tune in to only the channels included in the selected category.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

7Direct Channel AccessYou can tune in to the desired channel directly by entering the channel number.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

1Press XM to select “XM” as the source.

2Press the DIRECT button.

The receiver enters the Direct Access mode and the numeric buttons now work for entering channel numbers.

The channel number position starts flashing on the display for about 5 seconds.

DIGITAL AUTO L R

LINEAR PCM

S.WFR

3Press the numeric buttons (0 – 9, h10) to enter the desired channel number while the channel number position is flashing.

•For channel number 005, press 5.•For channel number 010, press h10, 1, then 0.•For channel number 015, press h10, 1, then 5.•For channel number 115, press h10, h10, 1, 1, then 5.

1Press XM to select “XM” as the source.

2Press CAT 9 or ( CAT.The receiver enters the Category Search mode.

The category name of the currently selected channel appears and “>” starts flashing on the display for about 15 seconds.

DIGITAL AUTO L R

LINEAR PCM

S.WFR

3Press CAT 9 or ( CAT repeatedly to display the desired category name on the display while “>” is flashing.

DIGITAL AUTO L R

LINEAR PCM

S.WFR

4Press repeatedly or hold CHANNEL +/– until the desired channel is tuned in.

•Pressing (or holding) CHANNEL + increases the channel number included in the selected category.

•Pressing (or holding) CHANNEL – decreases the channel number included in the selected category.

NOTE

While searching, the invalid and unsubscribed channels are skipped.

Using preset tuning

Once a channel is assigned a preset number, the channel can be quickly tuned simply by selecting the number. You can preset up to 30 channels.

To store the preset channels

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

From the remote control ONLY:

1Tune in to the channel you want to preset (see “Tune in to channels” above).

2Press MEMORY.

The preset number position starts flashing on the display for

about 5 seconds.

DIGITAL AUTO L R

LINEAR PCM

S.WFR

3Press the numeric buttons (0 – 9, h10) to select a preset number while the preset number position is flashing.

•For preset number 5, press 5.•For preset number 10, press h10, 1, then 0.•For preset number 15, press h10, 1, then 5.

18