Operating procedure

 

Setting the speakers

1,7

3,5 2,4

To obtain the best possible surround effect from the Surround and

 

 

DSP modes, register the setting about the speaker after all

 

 

connections are completed.

 

 

• If you have used Quick Speaker Setup on page 17, this setting

 

 

is not required.

On the front panel ONLY:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Ex.: When setting DIGITAL IN 1 terminal.

1Press SETTING.

MULTI JOG now works for the setting operation.

2Turn MULTI JOG until the item you want to set appears on the display.

•As you turn MULTI JOG, the setting items change as follows:

ANALOG

LR

S.WFR

Setting subwoofer information—SUBWOOFER

Select whether you have connected a subwoofer or not.

SUBWFR <YES> Select when you have connected a

subwoofer.

The subwoofer indicator ( S.WFR ) lights up on the display. You can adjust the subwoofer output level (see page 24).

SUBWFR <NO> Select when you have disconnected a subwoofer. Selecting this changes the front speaker size to “LRG” (see below).

Initial setting: SUBWFER <NO>

Setting the speaker size—FRONT SPK (front speakers), CENTER SPK (center speaker), SURROUND SPK (surround speakers), S BACK SPK (surround back speakers)

Register the sizes of all the connected speakers.

QUICK SPK SET FRONT SPK SURROUND SPK S BACK OUT FRONT L DIST CENTER DIST SURR R DIST S BACK L DIST EX/ES/PLIIx

SUBWOOFER OUT LFE ATT DIGITAL IN 1 DIGITAL IN 3 VCR VIDEO IN ONE TOUCH OPE

SUBWOOFER CENTER SPK S BACK SPK DIST UNIT FRONT R DIST SURR L DIST S BACK DIST S BACK R DIST DUAL MONO CROSSOVER MIDNIGHT MODE DIGITAL IN 2 DVD VIDEO IN DBS VIDEO IN

(Back to the beginning)

<LRG> (large) Select when the cone speaker size is larger

than 12 cm (4 3/4 inches).

<SML> (small) Select when the cone speaker size is smaller than 12 cm (4 3/4 inches).

<NO>

Select when you have disconnected a speaker.

 

(Not selectable for the front speakers.)

 

 

Initial setting: <LRG> (for the front speakers) <SML> (for other speakers)

Setting the surround back speaker(s)—S BACK OUT

Register the number of the surround back speaker(s).

SB OUT <1SPK> Select when you use 1 surround back speaker.

SB OUT <2SPK> Select when you use 2 surround back speakers.

3Press SET.

The current setting of the selected item appears.

ANALOG

LR

S.WFR

4Turn MULTI JOG to select the appropriate setting.

ANALOG

L R

S.WFR

DVR/DVD DBSTV VCR

Your setting is stored.

5Press SET.6Repeat steps 2 to 5 to set other items if necessary.

7Press SETTING.

The source indication resumes on the display.

Initial setting: SB OUT <2SPK>

NOTES

•If you have selected “SML (small)” for the front speaker size, you cannot select “LRG (large)” for other speakers.

•When “SUBWOOFER” is set to “SUBWFR <NO>,” the front speaker size is fixed to “LRG” (and you cannot select “SML”).

•When “SURROUND SPK” is set to “SML (small),” you cannot select “LRG (large)” for the surround back speaker.

•When “SURROUND SPK” is set to “NO,” the surround back speaker is fixed to “NO.”

•When “S BACK SPK” is set to “NO,” you cannot select “S BACK OUT.”

•When “SB OUT” is set to “<1SPK>,” connect the surround back speaker to the left surround back speaker terminal (see page 6). No sound comes from the surround back speaker if you connect it to the right surround back speaker terminal.

19