AV COMPU LINK remote control system

The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, DVD player*, and VCR) through this receiver.

This receiver is equipped with the AV COMPU LINK-III, which has added a function to operate JVC’s video components through the component video jacks. To use this remote control system, you need to connect the video components you want to operate, following the diagrams below and the procedures on page 35.

•Refer also to the manuals supplied with your video components.

*“DVD player” on pages 34 and 35 can be replaced with “DVD recorder.”

Connections 1: AV COMPU LINK connection

TV

AV

 

AV

 

COMPU LINK-III

 

COMPU LINK EX

 

 

 

 

 

 

 

 

 

 

 

Monaural mini-plugs (not supplied)

AV

COMPU LINK-III

Connections 2: Video cable connection

This receiver is equipped with three types of the video terminals— composite video, S-video, and component video, and the signals coming into this receiver through one type of video terminals can output only through the terminal of the same type. So you need to connect the video components to this receiver using one of the following three ways.

•When using the AV COMPU LINK remote control system, set the video input for the DVD player and the VCR correctly (see “Selecting the component video input mode—DVD VIDEO IN/ VCR VIDEO IN/DBS VIDEO IN” on page 22); otherwise, the correct input for this receiver will not be selected on the TV.

Case 1:

When connecting the source equipment to the receiver through the S-video terminals, connect this receiver to the TV’s video input 1 terminal using S-video cables.

 

S-video cable

S-video cable

 

 

 

 

 

 

Source

 

 

RX-D301S

 

TV

equipment

 

 

RX-D302B

 

 

 

 

 

 

 

 

 

 

 

To video input 1

Case 2:

When connecting the source equipment to the receiver through the composite video jacks, connect this receiver to the TV’s video input 2 terminal (composite video input) using composite video cables.

Composite video cable

Composite video cable

 

 

 

 

 

 

Source

 

RX-D301S

 

 

TV

equipment

 

RX-D302B

 

 

 

 

 

 

 

 

 

 

 

 

To video input 2 (Composite)

Case 3:

When connecting the source equipment to the receiver through the component video jacks, connect this receiver to the TV’s video input 2 terminals (component video input) using component video cables.

Monaural mini-plugs (not supplied)

AV

COMPU LINK

DVD player

AV

COMPU LINK

Component video cable

Component video cable

 

 

 

 

 

 

 

Source

 

RX-D301S

 

 

TV

 

equipment

 

RX-D302B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To video input 2 (Component)

VCR

IMPORTANT:

The AV COMPU LINK remote control system cannot control the DBS tuner connected to the DBS IN jacks.

NOTES

•When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic selection of TV’s input mode (see page 35).

•When connecting only the VCR and DVD player to this receiver, connect it directly to the receiver using cable with the monaural mini-plugs.

•You can connect only the TV with AV COMPU LINK EX or AV COMPU LINK-IIIterminal to the AV COMPU LINK-IIIterminal.

34