Operating other manufacturers’ products
By changing the transmittable signals, you can use the supplied remote control to operate other manufacturers’ products.
•Refer also to the manuals supplied with the other products.
•To operate those components with the remote control, first you need to set the manufacturers’ codes each for the TV, VCR, CATV converter, DBS tuner, and DVD player.
•After replacing batteries of the remote control, set the manufacturers’ codes again.
•All the functions may not be assigned to the buttons in some equipment.
❏Changing the transmittable signals for operating a TV1Press and hold TV
.2Press TV.3Enter the manufacturer’s code using buttons 1 – 9, and 0.See “Manufacturers’ codes for TV” on the right.
4Release TV
.Now, you can perform the following operations on the TV.
TV : | Turn on or off the TV. |
TV VOL | Adjust the volume on the TV. |
|
|
TV/VIDEO: | Change the input mode (either TV or |
| VIDEO). |
|
|
After pressing TV, you can perform the following operations on the TV.
CHANNEL
1 – 9, 0, 100+ (+10): Select the channel numbers.
See the instructions supplied with the TV for details.
5Try to operate your TV by pressing TV
.When your TV turns on or off, you have entered the correct code.
If more than one code is listed for your brand of TV, try each
one until the correct one is entered.
Manufacturer | Codes |
JVC | 01 |
Akai | 02 |
Bell+Howell | 03 |
Centurion | 04 |
Coronad | 05 |
Daewoo | 06, 07, 08 |
Emerson | 09, 10, 11, 12, 13 |
Fisher | 14 |
GE•Pana | 15, 16 |
GE•RCA | 17 |
Gold Star | 18, 19 |
Hitachi | 20, 21 |
KTV | 22, 23 |
Magnavox | 24 |
Marantz | 25 |
Mitsubishi | 25 |
Panasonic | 26, 27 |
Philips | 24 |
Pioneer | 28 |
Proscan | 29 |
Quasar | 30 |
Radioshack | 31 |
RCA | 02, 17, 32, 33, 34, 35 |
Samsung | 36, 37 |
Sanyo | 14 |
Sears | 38 |
Sharp | 39 |
Sony | 40 |
Symphonic | 41, 42 |
Toshiba | 38 |
Zenith | 43, 44 |
Initial setting: 01
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
38