Operating procedure
| 1, 7 | 3, 5 | 2, 4 |
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
On the front panel ONLY:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
Ex.: When setting the DIGITAL IN 1 terminal
1Press SETTING.
MULTI JOG now works for the setting operation.
2Turn MULTI JOG until the item you want to set appears on the display.
•As you turn MULTI JOG, the setting items change as follows:
To obtain the best possible surround effect from the Surround and DSP modes, register the setting about the speaker after all connections are completed.
•If you have performed Precise Surround Setup on pages 16 to 18, the following settings are not required.
7 Setting subwoofer information—
SUBWOOFER
Select if you have connected a subwoofer or not.
SUBWFR YES Select when you have connected a subwoofer.
The subwoofer indicator (
) lights up on the display. You can adjust the subwoofer output level (see page 36).
SUBWFR NO Select when you have not connected a subwoofer. Selecting this changes the front speaker size to “LRG” (see below).
Initial setting: NO
SUBWOOFER Ô FRONT SPK Ô CENTER SPK Ô SURROUND SPK Ô S BACK SPK Ô S BACK OUT Ô DIST UNIT Ô FRONT L DIST Ô FRONT R DIST Ô CENTER DIST Ô SURR L DIST Ô SURR R DIST Ô
S BACK DIST Ô S BACK L DIST Ô S BACK R DIST Ô EX/ES/PLIIx Ô DUAL MONO Ô SUBWOOFER OUT Ô CROSSOVER Ô LFE ATT Ô MIDNIGHT MODE Ô DIGITAL IN 1 Ô DIGITAL IN 2 Ô DIGITAL IN 3 Ô AUDIO DELAY Ô HDMI SELECT Ô CMPNT SELECT
ÔVIDEO OUTPUT Ô (Back to the beginning)
3Press SET.
The current setting of the selected item appears.
4Turn MULTI JOG to select the appropriate setting.
DVR/DVD Ô DBS Ô VCR Ô TV
5Press SET.
Your setting is stored.
6Repeat steps 2 to 5 to set other items if necessary.
7Press SETTING.
The source indication resumes on the display.
7 Setting the speaker
Register the sizes of all the connected speakers.
LRG (large) | Select when the cone speaker size is larger |
| than 12 cm (4 3/4 inches). |
SML (small) | Select when the cone speaker size is smaller |
| than 12 cm (4 3/4 inches). |
NO | Select when you have not connected |
| the speaker. (Not selectable for the front |
| speakers.) |
|
|
Initial setting: | LRG (for the front speakers) |
| SML (for the other speakers) |
NOTES
•If you have selected “SML (small)” for the front speaker size, you cannot select “LRG (large)” for other speakers.
•When “SUBWOOFER” is set to “NO,” the front speaker size is fixed to “LRG (large)” (and you cannot select “SML (small)”).
•When “SURROUND SPK” is set to “SML (small),” you cannot select “LRG (large)” for the surround back speaker.
•When “SURROUND SPK” is set to “NO,” the surround back speaker is fixed to “NO.”
30