English

CONNECTIONS 3: Video Cable Connection

This receiver is equipped with video signal conversion function (for details, see “IMPORTANT” on page 12). However, with the AV COMPU LINK remote control system, video conversion function cannot be used. So, connect the VCR and/or DVD player to the TV using only one of the following three ways:

•The video input terminal should be correctly preset (see “p Setting the Video Input Terminals—VIDEO INPUT” on page 43); otherwise, the correct input for this receiver will not be selected on the TV.

 

When connecting the source equipment to the receiver through the S-video jacks, connect this receiver to the

 

TV’s Video Input 1 terminal using S-video cables.

 

 

 

 

 

 

 

 

 

 

 

CASE 1

 

Source

 

RX-DP20VBK

 

TV

 

 

 

Equipment

S-video cable

S-video cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To Video Input 1

 

 

 

 

 

 

 

 

 

When connecting the source equipment to the receiver through the composite video jacks, connect this receiver

 

to the TV’s Video Input 2 terminal (composite video input) using composite video cables.

CASE 2

 

 

 

 

 

 

 

 

Source

 

RX-DP20VBK

 

TV

 

 

 

Equipment

Composite

Composite

 

 

 

 

 

 

 

 

 

video cable

 

video cable

To Video Input 2

 

 

 

 

 

 

 

 

 

When connecting the source equipment to the receiver through the component video jacks, connect this

 

receiver to the TV’s Video Input 2 terminal (component video input) using component video cables.

CASE 3

 

 

 

 

 

 

 

 

Source

 

RX-DP20VBK

 

TV

 

 

 

Equipment

Component

Component

 

 

 

 

 

 

 

 

 

video cable

video cable

To Video Input 2

 

 

 

 

 

 

 

 

The AV COMPU LINK remote control system allows you to use the five basic functions listed below.

Remote Control of the TV, DVD player, and VCR Using This Remote Control

IMPORTANT:

To operate the video components using the IR signal transmitter (supplied), place it so that it is aimed at the remote sensor(s) on the target video component(s).

•The IR signal transmitter can send signals at a distance of 3 m (10 feet).

DVD DVD player

TV VCR

RX-DP20VBK

You can control the connected video components using this remote control. Aim the remote control at the remote sensor(s) on the target video component(s) or on the receiver directly.

For details, see page 73.

One-Touch Video Play

•Simply by inserting a video cassette without its safety tab into the VCR 1 (the VCR connected to the VCR 1 jacks), you can watch the video playback without setting other switches manually.

The receiver automatically turns on and changes the Zone 1 source to “VCR 1.”

The Zone 1 TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.

When you insert a video cassette with its safety tab in place, press the play (3) button on the VCR 1 or on its remote control. Thus, you can get the same result.

–If the receiver is already turned on with the ZONE 2 ON/OFF lamp on the unit is lit and the source name for Zone 2 appears on the display, the receiver changes the Zone 2 source to “VCR 1.” (In this case, the Zone 2 TV will not turn on.)

•When you press PLAY on the remote control supplied for this receiver for operating the VCR 1, the receiver automatically turns on and changes the Zone 1 source or Zone 2 source to

“VCR 1”—depending on the ZONE 1/ZONE 2 (LEARN/ TRANSMIT) selector setting on the remote control.

–For Zone 1 operations only: The Zone 1 TV automatically turns on and changes the input mode to the appropriate position so that you can view the picture.

69