English
Operating JVC’s Audio/Video Components
You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC components are preset in the remote control.
Operating Audio Components
IMPORTANT:
To operate JVC’s audio components using this remote control:
•You need to connect JVC’s audio components through the COMPU LINK (SYNCHRO) jacks (see page 61) in addition to the connections using cables with RCA pin plugs (see page 11).
•Aim the remote control directly at the remote sensor on the receiver.
•To operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.
•To operate the cassette deck or MD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 27.)
•Refer also to the manuals supplied with your components.
When using the remote control:
–Set ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector to “ZONE 1” or “ZONE 2” correctly.
–Check the indication shown on the remote’s display when you press a
–The CONTROL button can change the remote control operation mode without changing the source.
Each time you press the button, the remote control operation mode changes in the
| LEARN | TRANSMIT |
| LEARN | TRANSMIT | ||
|
|
|
|
| |||
ZONE 1 | ZONE 2 | ZONE 1 | ZONE 2 | ||||
|
|
|
| ||||
LEARN TRANSMIT |
|
| LEARN TRANSMIT |
|
| ||
|
|
|
|
|
| ||
|
| STANDBY | ON |
|
| STANDBY | ON |
|
|
|
|
|
| ||
ZONE 1 | ZONE 2 |
|
| ZONE 1 | ZONE 2 |
|
|
ZONE 1 | ZONE 2 | TV/CATV/DBS | VCR 1 | ZONE 1 | ZONE 2 | TV/CATV/DBS | VCR 1 |
|
|
|
| ||||
ON/OFF | ON/OFF |
|
| ON/OFF | ON/OFF |
|
|
|
| STANDBY/ON | STANDBY/ON |
|
| STANDBY/ON | STANDBY/ON |
|
|
|
|
|
| ||
ZONE 1 | ZONE 2 |
Ex. When you press FM/AM | Ex. When you press FM/AM |
with ZONE 1/ZONE 2 | with ZONE 1/ZONE 2 |
(LEARN/TRANSMIT) | (LEARN/TRANSMIT) |
selector set to “ZONE 1.” | selector set to “ZONE 2.” |
|
|
Tuner
You can always perform the following operations:
FM/AM | : Tunes in to the last station of the last |
| selected band. Each time you press the |
| button, the band alternates between FM |
| and AM. |
After pressing FM/AM, you can perform the following operations:
1 – 10, +10 | : Selects a preset channel number directly. |
| For channel number 5, press 5. |
| For channel number 15, press +10, then 5. |
| For channel number 20, press +10, then 10. |
TUNING UP/DOWN | : Tunes in to stations. |
FM MODE | : Changes the FM reception mode. |
Sound control section (Amplifier)
You can always perform the following operations:
THX | : Selects the THX modes. |
SURROUND | : Selects the Surround modes |
EX/ES/7.1 | : Selects the |
| modes. |
DSP | : Selects the DSP modes. |
SURR/DSP OFF | : Deactivates the THX/Surround/DSP |
| modes. |
ANALOG DIRECT | : Turns on or off Analog Direct. |
ANALOG/DIGITAL INPUT : Selects the analog/digital inputs. | |
CC CONVERTER | : Turns on or off CC Converter. |
After pressing SOUND, you can perform the following operations:
TEST: Turns on or off the test tone output.
FRONT•L then LEVEL
FRONT•R then LEVEL
SUBWFR then LEVEL
CENTER then LEVEL
SURR•L then LEVEL
SURR•R then LEVEL
SURR BK•L then LEVEL
SURR BK•R then LEVEL
| channel speaker output level. |
EFFECT | : Selects the effect level. |
LIVENESS | : Selects the liveness. |
Notes:
•After adjusting sounds, press the corresponding source selecting button to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.
•When you press LEVEL + or LEVEL
71