English

To change the transmittable signals for operating another manufacturer’s CATV converter and DBS tuner

To change the transmittable signals for operating another manufacturer’s VCR

1. Press and hold VCR 1

VCR 1

 

1.Set the TV operation mode selector to “CATV/DBS.”

2.Press and hold TV/CATV/DBS

(STANDBY/ON).

3. Press TV/DBS.

Remote’s display

TV

CATV/

DBS

TV/CATV/DBS

STANDBY/ON

TV/DBS

(STANDBY/ON).

STANDBY/ON

2. Press VCR 1.

VCR1

Remote’s display

3. Enter a manufacturer’s code using

 

 

EFFECT

1

2

3

buttons 1–9, and 0.

 

 

LIVENESS

4

5

6

See page 77 to find the code.

7/P

8

9

 

4. Enter a manufacturer’s code using

 

 

EFFECT

1

2

3

buttons 1–9, and 0.

 

 

LIVENESS

See page 77 to find the code.

4

5

6

 

 

 

 

7/P

8

9

 

10

0

+10

 

RETURN

FM MODE

100+

5. Release TV/CATV/DBS (STANDBY/ON).

After setting the TV operation mode selector to “CATV/DBS,” you can turn on and off the CATV convertor or the DBS tuner:

TV/CATV/DBS (STANDBY/ON)

: Turns on or off the CATV converter or DBS tuner.

After pressing TV/DBS (with TV operation mode selector set to “CATV/DBS”), you can perform the following operations on the CATV convertor or on the DBS tuner:

CHANNEL +/–

: Changes the channels.

1–10, 0, 100+ (+10)

: Selects the channels.

Number button 10 will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.

Note:

Refer to the manual supplied for your CATV convertor or DBS tuner.

6. Try to operate your CATV converter TV/CATV/DBS

10

0

+10

RETURN

FM MODE

100+

4. Release VCR 1 (STANDBY/ON).

The following button can be used for operating the VCR :

VCR 1 (STANDBY/ON)

: Turns on or off the VCR.

After pressing VCR 1, you can perform the following operations on the VCR:

1–10, 0, 100+ (+10) : Selects the TV channels.

 

Number button 10 will function as

 

the ENTER button if your VCR

 

requires pressing ENTER after

 

selecting a channel number.

PLAY

: Starts playback.

REW

: Rewinds a video tape.

FF: Fast-winds a video tape.

STOP

: Stops operation.

PAUSE

: Pauses playing.

REC

: Press this button together with the PLAY

 

button to start recording (only for Zone 1

 

operation).

 

Press this button together with the PAUSE

 

button to enter recording pause (only for

 

Zone 1 operation).

CHANNEL +/– :Changes the TV channels on the VCR.

or DBS tuner by pressing TV/CATV/

DBS (STANDBY/ON).

STANDBY/ON

Note:

Refer to the manual supplied for your VCR.

When your CATV converter or DBS tuner turns on or off, you have entered the correct code.

If more than one code is listed for your brand of CATV

converter or DBS tuner, try each one until the correct one is entered.

Note:

You cannot preset the signals for both the CATV converter and DBS tuner at the same time.

5. Try to operate your VCR by pressing

VCR 1

VCR 1

 

(STANDBY/ON).

STANDBY/ON

 

 

When your VCR turns on or off, you have

 

entered the correct code.

If more than one code is listed for your brand of VCR, try

each one until the correct one is entered.

75