Operating Other Manufacturers’ Equipment

CATV/

DBS

You can use this remote control supplied for operating other manufacturers’ components, either by changing the preset signal codes or by using the learning function (see page 78).

IMPORTANT:

•To operate the other component(s) using the RF signals emitted from this remote control, the IR signal transmitter and the RF rod antenna must be connected to this receiver.

–Place the IR signal transmitter so that it is aimed at the remote sensor(s) on the target component(s).

–The RF signal-reachable distance may differ depending on the operating conditions and circumstances.

–The IR signal transmitter can send signals at a distance of 3 m (10 feet).

When using the remote control:

–Set the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector to “ZONE 1” or “ZONE 2” correctly.

LEARN TRANSMIT		LEARN TRANSMIT


ZONE 1	ZONE 2	ZONE 1	ZONE 2

–Set the TV operation mode selector to “TV” or “CATV/DBS” correctly.

To operate TV, set it to “TV.”

Changing the Preset Signal Codes

By changing the transmittable signals from preset ones to the other manufacturers’, you can operate the other manufacturer’s components using this remote control.

•When operating the other manufacturers’ components, refer also to the manuals supplied with them.

To change the transmittable signals for operating another manufacturer’s TV

1. Set the TV operation mode selector to

“TV.”TV

CATV/

DBS

2.	Press and hold TV/CATV/DBS	TV/CATV/DBS
	(STANDBY/ON).	STANDBY/ON
		STANDBY/ON
3.	Press TV/DBS.

To operate the CATV converter or the DBS tuner, set it to “CATV/DBS.”

–Check the indication shown on the remote’s display

when you press a button—this indicates the remote control operation mode together with multi-room operation mode (either ZONE 1 or ZONE 2) for a while.

LEARN TRANSMIT			LEARN	TRANSMIT
	STANDBY	ON		STANDBY	ON
ZONE 1	ZONE 2		ZONE 1	ZONE 2
ZONE 1	ZONE 2 TV/CATV/DBS	VCR 1	ZONE 1	ZONE 2 TV/CATV/DBS	VCR 1
ON/OFF	ON/OFF		ON/OFF	ON/OFF
	STANDBY/ON	STANDBY/ON		STANDBY/ON	STANDBY/ON

Remote’s display

4. Enter a manufacturer’s code using buttons 1–9, and 0.

See page 76 to find the code.

TV/DBS

		EFFECT
1	2	3
		LIVENESS
4	5	6
7/P	8	9
10	0	+10
RETURN	FM MODE	100+

ZONE 1

ZONE 2

Ex. When you press VCR1	Ex. When you press VCR1
with ZONE 1/ZONE 2	with ZONE 1/ZONE 2
(LEARN/TRANSMIT)	(LEARN/TRANSMIT)
selector set to “ZONE 1.”	selector set to “ZONE 2.”

CAUTION:

When replacing the batteries, finish changing them without delay;

otherwise, preset manufacturers’ codes will be reset.

5. Release TV/CATV/DBS (STANDBY/ON).

After setting the TV operation mode selector to “TV,” you can perform the following operations on the TV:

TV/CATV/DBS

(STANDBY/ON)

: Turns on or off the TV. TV VOL +/– :Adjusts the volume.

TV/VIDEO : Sets the input mode (either TV or VIDEO).

After pressing TV/DBS (with the TV operation mode selector set to “TV”), you can perform the following operations on a TV:

CHANNEL +/–		: Changes the channels.
1–10, 0, 100+ (+10)		: Selects the channels.
		Number button 10 will function as
		the ENTER button if your TV
		requires pressing ENTER after
		selecting a channel number.
Notes:

•Refer to the manual supplied for your TV.

•All the buttons listed above may not be used for some TVs.

•If you cannot change the channels of some TVs by pressing number buttons, press CHANNEL +/– .

6. Try to operate your TV by pressing TV/CATV/DBS

TV/CATV/DBS (STANDBY/ON).

STANDBY/ON

When your TV turns on or off, you have entered the correct code.

If more than one code is listed for your brand of TV, try each

one until the correct one is entered.

RX-DP20VBKC specifications

The JVC RX-DP20VBKC is a versatile and high-performance audio receiver designed to enhance the home entertainment experience. It combines advanced technology with user-friendly features, making it an excellent choice for music enthusiasts and movie lovers alike.

One of the standout features of the RX-DP20VBKC is its powerful amplification system. With a robust output power of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, providing rich and dynamic sound quality across various genres of music. The receiver supports a variety of audio formats, ensuring compatibility with different media sources.

The RX-DP20VBKC is equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones, tablets, or other Bluetooth-enabled devices. This convenience eliminates the need for tangled cables and enhances the overall user experience. Additionally, the receiver features USB inputs, enabling direct playback from USB flash drives, and a built-in FM/AM tuner for accessing radio stations.

Another key characteristic of this model is its multi-room capability. Users can enjoy music in multiple rooms by connecting additional compatible speakers. The receiver supports various speaker configurations, making it adaptable for larger spaces or different setups.

In terms of sound processing, the RX-DP20VBKC includes several advanced audio technologies. It boasts a built-in digital signal processor that enhances sound clarity and spatial dynamics. Users can choose from various sound presets or customize their listening experience with adjustable equalizer settings. This flexibility allows for tailored sound quality that suits individual preferences.

The design of the RX-DP20VBKC is sleek and modern, featuring an intuitive front panel with easy-to-read displays and controls. The remote control enhances usability, giving users the ability to manage playback settings from a distance.

In summary, the JVC RX-DP20VBKC is a formidable audio receiver that combines power, versatility, and modern connectivity options, making it an ideal centerpiece for any home audio system. With its impressive amplification, wireless streaming capabilities, and advanced sound processing technologies, it caters to the diverse needs of today’s audio consumers.

JVC RX-DP20VBKC manual Operating Other Manufacturers’ Equipment, Changing the Preset Signal Codes

Models: RX-DP20VBKC