Connections

This page is for

 

 

 

 

 

 

 

 

Note that the illustration below is for TH-S5.

Before connecting the speaker cords;

Twist and pull the insulation coat off and remove.

4 m

Front speakers

(TH-S5: SP-THS5F*1) TH-S51: SP-THM303F*2

Powered subwoofer

(TH-S5: SP-PWS5 )

TH-S51: SP-PWS51 4 m

10 m

Center speaker

(TH-S5: SP-THS5C*1) TH-S51: SP-THM303C*2

Speaker cord (supplied)

•Connect the silver cords to the black (r) terminals.

•Connect the copper cords to the (q) terminals referring to the table below:

FRONT SPEAKERS (LEFT)

White

 

 

FRONT SPEAKERS (RIGHT)

Red

 

 

CENTER SPEAKER

Green

 

 

SURROUND SPEAKERS (LEFT)

Blue

 

 

SURROUND SPEAKERS (RIGHT)

Gray

 

 

Surround speakers

(TH-S5: SP-THS5S*1)

TH-S51: SP-THM303S*2

*1 For TH-S5

Silver Copper

Red

Black

*2 For TH-S51, the satellite speakers are equipped with their speaker cords attached directly to their speaker unit instead of having speaker terminals on their cabinet.

Front/Center

Surround

speakers

speakers

CAUTION

•When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated near the speaker terminals on the rear of the powered subwoofer.

•DO NOT connect more than one speaker to one speaker terminal.

•When installing the satellite speakers on the wall;

•Be sure to have them installed on the wall by a qualified personnel. DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from their falling off the wall due to incorrect installation or weakness in wall structure.

•Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to equipment may result if the speakers installed interfere with daily activities.

11