JVC CA-FSP5, SP-UXP5 manual Using the Timers, Using Daily Timer and Recording Timer

Using the Timers Continued

There are three timers available — Daily Timer, Recording Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the unit (see page 9). When you press TIMER on the unit for more than 3 seconds, the display alternates between “ADJUST” and “CLOCK” for about 5 seconds.

Using Daily Timer and Recording Timer

You can set the timer whether the unit is on or off.

When the on-time comes, the unit automatically turns on

(the indicator flashes just before the on-time, and continues flashing while the timer is operating). Then, when the off-time comes, the unit automatically turns off (on standby).

2 Set the on-time you want the unit to turn on at.

1)Press ¢ or 4to set the hour, then press TIMER.

2)Press ¢ or 4to set the minute, then

press TIMER.			TIMER
The unit enters off-time setting mode.
(Example: PM 1:30)
	[DAILY	]

3 Set the off-time you want the unit to turn off (on standby) at.

1)Press ¢ or 4to set the hour, then press

The timer setting remains in memory until you change it.

TIMER.

TIMER

•When the DAILY indicator is lit on the display, the timer acts as the Daily Timer. Once the Daily Timer has been set, it will be activated at the same time everyday until the timer is turned off.

•When the REC indicator is lit on the display, the timer acts as the Recording Timer. After the Recording Timer has been performed, the details of the setting remain stored but the timer is turned off.

Before you start...

When using “ TUNER” as the source to play, make sure to select the desired station before turning off the power.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the unit ONLY:
1 Press and hold TIMER for more	TIMER
than 3 seconds.

The timer ( ) indicator lights up, and the timer mode indicator (DAILY or REC) and the current on-time flash on the display.

The unit enters on-time setting mode. (Example: AM 12:00)

[DAILY ]

2) Press ¢ or 4to set the minute, then press TIMER.

The unit enters source selecting mode.

4 Press ¢or 4to select

the timer mode (Daily Timer or Recording Timer) and the

source to play, then press TIMER.

• Each time you press ¢ or 4, the timer	TIMER
mode and the source change as follows:

DAILY TUNER REC TUNER

DAILY TAPE DAILY CD

DAILY TUNER: tunes into the last station you were listening to. (Daily Timer)

REC TUNER: records the last station you were listening to. (Recording Timer)

•Put a recordable cassette into the deck.

DAILY CD: plays a CD. (Daily Timer)

DAILY TAPE: plays a tape. (Daily Timer)

•Make sure that the tape direction is correct.

5 Press ¢or 4to set the volume level.

• You can select the volume level

(“VOLUME 0” to “VOLUME40” and “VOLUME –”).

If you select “ VOLUME –,” the volume is set to the last level when the unit has been turned off.

To turn off the volume while the Recording Timer (REC TUNER) is working, set the volume level

“VOLUME 0.”

– 18 –