Manuals / Brands / TV and Video / VCR / JVC / TV and Video / VCR

JVC SR-L911UB 6-4 Selection of Record/Play Mode, 6-3 Summer Time Compensation

1 54

Download 54 pages, 627.19 Kb

23

During daylight savings time

1Set the time with one-hour delay.

2After setting the time, set the <SUMMER TIME> switch

to "ON".

• The set time advances one hour.

3At the end of the daylight savings time season, set the

<SUMMER TIME> switch to OFF.

• The standard time instead of "Summer Time" is

displayed.

Set whether or not the Summer Time mode is engaged with

the <SUMMER TIME> function menu switch on the VTR

mode 2 setting screen.

When the <SUMMER TIME> switch is set to "ON", the

currently set time is advanced one hour.

6 PREPARATION6-4 Selection of Record/Play Mode6-3 Summer Time Compensation

• When setting the time, make sure the <SUMMER TIME>

switch is set to "OFF".

When the unit is shipped, this switch is set to "OFF".

• Clock setting is not possible during timer recording.

Standard time

1Set the clock to the actual time.

2When daylight savings starts, set the <SUMMER TIME>

menu switch to "ON".

• The time advances one hour on the display

1Press the [OPERATE] button to turn the operating mode on.

The [OPERATE] indicator lights.

2Select the recording/playback time mode with the [TIME MODE] button. Refer to the table below for more information on

each mode.

• Each time the [TIME MODE] button is pressed, the recording/playback mode changes in the following order:

8H (VHS EP mode) [ L24H (24-hour Timelapse mode) [ L40H (40-hour Timelapse mode) [ 8H (VHS EP mode) ...

• The selected recording or playback time mode is shown on the display.

• The EP indicator lights.

Note:

• When a tape recorded in the VHS Standard Play (SP) mode is played back, the SP indicator lights. Recording in the

SP mode is not possible with this unit.

SP indication

[TIME MODE] button

Display section

Recording/playback time

mode indication

EP indication

*Recording time varies depending on the type of cassette used.

* For optimum performance and reliability, use a tape with a standard recording time of 160 minutes (T-160) or less.

Display

indi-

cations

Available recording time (hour)

T-30 T-60 T-90 T-120 T-160

8H VHS EP 1.5 3 4.5 6 8 — Possible (Continuous) 11.12 mm/sec.

L24H 24-hour Timelapse 4.5 9 13.5 18 24 0.05 Possible (Continuous) 3.71 mm/sec.

L40H 40-hour Timelapse 7.5 15 22.5 30 40 0.08 Possible (Continuous) 2.22 mm/sec.

Modes Recording/

playback

interval (sec.)

Audio

recording Tape

running

Contents

Main INSTRUCTIONS SR-L911UB VIDEO CASSETTE RECORDER SAFETY PRECAUTIONS CAUTION ATTENTION INFORMATION CAUTION NOTE: CONTENTS 1 INTRODUCTION 2 CONTROLS AND CONNECTORS 3 CONNECTIONS 4 MONITOR ON-SCREEN DISPLAY 1 INTRODUCTION 1-2 Periodical Maintenance 1-3 Precautions 5 Handling and storage place 5 5 5 2 CONTROLS AND CONNECTORS 2-1 Front Panel 6816 4 3 2-1 Front Panel 7 8 9 0 2-2 Display 1 6 8 911 12 13 2 3 45 7 10 14 6 2-1 FRONT PANEL 2-3 Rear Panel 1 2 3 4 ! @ # $ % 3 CONNECTIONS 1 2 3 4 5 3-2 Connecting a System Using a Sequential Switcher 3 CONNECTIONS 1 2 the SR-L911UB. 3 4 5 3-3 Connecting the Rear Panel Input/Output Terminal Connections COM CAM SW OUT External interface example 5 4 MONITOR ON-SCREEN DISPLAY 4-1 On-Screen Display in the Time/Date and Record Modes 5 1 2 4-2 Main Menu Display 4 MONITOR ON-SCREEN DISPLAY 5 1 2 4-3 Alarm Input/Power Loss Data Display 1 2 3 4 5 5 SETTING OF THE FUNCTION MENU SWITCHES 5-1 Function Menu Switch Setting 5 1 2 3 [ Three function menu switch setting screens are available. [ ]: Factory setting [ ]: Factory setting [ ]: Factory setting 6 PREPARATION 6-2 Date and Time Setting 6-1 Cassette Loading/Unloading Loading Auto power on 6 PREPARATION Set the date and time using the CLOCK ADJUST menu screen. Set the date and time on the front panel display 1 2 3 4 6-4 Selection of Record/Play Mode 6-3 Summer Time Compensation Standard time 1 2 1 7 RECORDING 7-1 Preparation 5 7-2 Recording Recording Check 5 [ 1 [ 2 1 2 [ 3 [ n [ n 4. 5 16.30.00 6. 7 8 4 5 7-3 Timer Recording 2, 3 16.30.00 6 4, 5 Canceling timer programming 1 2 1 2 3 Notes on timer recording Changing a preset timer program 1 2 3 [ 4 AL 7-4 Alarm Recording 5 7-4 Alarm Recording Connect an alarm sensor to the rear panels alarm input terminal. 1 2 3 7-5 Sensor Recording Connect an alarm sensor to the rear panels alarm input terminal. 1 2 3 7-6 Repeat Recording Page 8-3 Special-Effects Playback Reverse playback 1 2 Still and field/frame advance 8-4 Index Search 5 When the picture moves up and down in the Still mode When noise appears in the picture in the Play/ Field Advance Play/Search mode n 9 TROUBLESHOOTING 9-1 Error Indication 5 5 5 8-3 Special-Effects Playback Reverse playback 1 2 Still and field/frame advance 8-4 Index Search 5 When the picture moves up and down in the Still mode When noise appears in the picture in the Play/ Field Advance Play/Search mode n 9 TROUBLESHOOTING 9-1 Error Indication 5 5 5 9-2 No Error Indication 9 TROUBLESHOOTING 10. OPTIONAL SA-K97U RS-232C INTERFACE BOARD 10-1. Installation of the SA-K97U 3. yourself on sharp edges and metal parts inside the VCR. Note: 10-2. SA-K97U Specifications 9-pin connector specifications Data format 5 5 5 5 5 10-3. SA-K97U RS-232C Protocol & Commands RS-232C protocol JVC table-1 JVC base table 10-3. SA-K97U RS-232C Protocol & Commands This section provides technical data for programmers. 30H 0AH Command description TXD B0H 33H 40H RXD 0AH 0AH 0AH 01H (or 05H) Search start Time 2-2 VCR setting commands TXD 7EH 30H 33H RXD 0AH 0AH 0AH Time 40H 0AH TXD 8EH RXD 0AH Time 30H 0AH 39H 0AH 33H 0AH 30H 0AH 39H 0AH 38H 0AH TXD 8FH RXD 0AH Time 31H 0AH 35H 0AH 32H 0AH 39H 0AH 35H 0AH 39H 0AH 2-3 Commands for VCR status verification * 2-4 Others (Input data correction/Error cancellation) TXD 7EH 30H 32H RXD 0AH 0AH 0AH Time 41H 0AH 33H 0AH 40H 0AH 3 Commands reference chart 11-1 Rear Panels Input/Output 11 APPENDIXES 11 APPENDIXES 11-2 Specifications [Time/date] [Alarm] [Accessories] [Video System]