22
1 7 : 3 0 : 0 1 L24H
9 – 30 – 1998
MAIN MENU
PROGRAM TIMER
FUNCTION
ALARM IN
POWER LOSS
HOUR METER
CLOCK ADJUST
PRESS (SHIFT, SET)
PRESS (MENU) TO END
CLOCK ADJUST
YEAR 2000
MONTH 1
DAY 1
HOUR 0
MINUTE 0
PRESS (SHIFT, SET)
PRESS (MENU) TO END
CLOCK ADJUST
YEAR 1998
MONTH 9
DAY 30
HOUR 17
MINUTE 30
PRESS (SHIFT, SET)
PRESS (MENU) TO END
6 PREPARATION[SHIFT +/-] button and
[SET +/-] button
[MENU] button
(Date/time setting screen)
[SET +/-] button
Set the date and time using the CLOCK ADJUST menu
screen.
1Turn on this unit and the monitor and engage the Stop mode.
2Press the [MENU] button to display the main menu screen.
3Press the [SHIFT +] or [SHIFT -]button to select <CLOCK ADJUST>.
(Set the cursor arrow to <CLOCK ADJUST>.)
4Press the [SET +] or [SET -] button to display the CLOCK ADJUST
screen on the monitor.
5Select the item to be set.
• Press the [SHIFT +] or [SHIFT -] button to select the item.
[The selected item will blink.
6Enter the value for the selected item with the [SET +/-] button.
• Press the [SET +] button to increase the number.
• Press the [SET -] button to decrease the number.
• The setting range for the year is from 1997 to 2096.
• This VCR uses the 24-hour clock.
• If an invalid date is set, it is automatically corrected.
(e.g.) 1999-2-29 [ 1999-2-28
nRepeat steps 5 and 6 until the year, month, date, hour, and minutes
have all been set.
7End date and time setting.
• Press the [MENU] button twice.
[The normal display is restored and the set date and time are shown
on screen. The time count starts from 00 seconds.
Note:
• If you press the [OPERATE] button after setting the date and time
without first pressing the [MENU] button, the set date and time are
canceled.
(Menu switch <POSITION> set to L-UP)
1Turn the power on.
2Press the [COUNT/CLOCK] button for at least 2 seconds.
• The “year” indication blinks in the display.
3Enter the value for the year with the [SET+] or [SET-] button.
4Press the [SHIFT+] button: the “month” indication blinks.
• Press the [SHIFT+] or [SHIFT-] button to move the blinking section.
• Enter the value for the blinking section with the [SET+] or [SET-]
button.
5Set the “month”, “day”, “hour” and “minute” with the [SHIFT+/-] and
[SET+/-] buttons.
6When you have finished setting, press the [COUNT/CLOCK] button.
• The display returns to the clock display mode and the time count
starts from 00 seconds.
Time indication on the VCR's display
•When the power is turned off, the time is displayed. When the power is turned on, set the time display mode with the
[COUNT/CLOCK] button to display the current time.
•The first time you turn on the power, the time display shows a blinking "0:00:00".
•When the built-in backup battery capacity is low, the error indication E-10 appears on the display. Contact your local JVC
dealer to replace the built-in battery.
Set the date and time on the front panel display
(Normal screen)
(Main menu)
MONTH DAY
HOUR MINUTE
YEAR