17
MAIN MENU
PROGRAM TIMER
FUNCTION
ALARM IN
POWER LOSS
HOUR METER
CLOCK ADJUST
PRESS (SHIFT, SET)
PRESS (MENU) TO END
A LARM / SENSOR REC MODE
(ALARM REC) OFF
(SENSOR REC) OFF
(DURATION) 180SEC
(BUZZER) OFF
(TAPE END MODE) STOP
PRESS (SHIFT, SET)
PRESS (MENU) TO END
ON SCREEN MODE
(POSITION) L –UP
PRESS (SHIFT, SET)
PRESS (MENU) TO END
VTR MODE 1
(SHARPNESS) NORMAL
(AUTO REC) OFF
(REC CHECK) NORMAL
(TAPE END MODE) REPEAT
(INDEX SEARCH) OFF
(CAMERA SW) OFF
(TAPE END BUZZER) OFF
(WARNING BUZZER) OFF
PRESS (SHIFT, SET)
PRESS (MENU) TO END
VTR MODE 2
(SUMMER TIME) OFF
(TAERMINAL SEL 1) SERIES
(TAERMINAL SEL 2) WARN
(REC REMAIN) OFF
PRESS (SHIFT, SET)
PRESS (MENU) TO END
●
5 SETTING OF THE FUNCTION MENU SWITCHES
You can customize the VCR's functions to suit the requirements of your application using on-screen menu's function switches.
●Menu function switches are available on four setting screens: ON SCREEN MODE, VTR MODE 1, VTR MODE 2 and
ALARM/SENSOR REC mode. (When the optional SA-K97U RS-232C interface board is installed, the RS-232C
PARAMETER setting screen is also available.)

5-1 Function Menu Switch Setting

Normal screen
[MENU]
button [MENU]
button
Main menu screen On-screen mode setting VTR mode 1 setting VTR mode 2 setting
[MENU] button
Preparation
5Connect the VCR's video output connector to the
monitor's video input connector.
5Turn on the VCR and the monitor. Make sure the Stop
mode is engaged.
1Press the [MENU] button to display the main menu.
2Press the [SHIFT +] or [SHIFT –] button to select
FUNCTION.
3Press the [SET +] or [SET –] button.
[The ON SCREEN MODE setting screen is
displayed.
• Only one menu switch is available in the ON SCREEN
MODE setting screen. This switch (<POSITION>)
allows you to select the screen position of the on-
screen display and to switch it ON/OFF.
4Press the [SET +] or [SET –] button to enter the selected
position.
5To display another setting screen, press the [SHIFT +/–]
button.
• Press the [SHIFT +] button to display the VTR mode 1
setting screen.
• Press the [SHIFT –] button to display the alarm/sensor
recording mode setting screen.
[SET –] button [SET +] button
[SET
+/-]
buttons
• When the optional SA-K97U RS-232C interface
board is installed, the RS-232C PARAMETER
setting screen is also available.
• Select an item with the [SHIFT +/-] buttons.
• Enter the selected values with the [SET +/-] buttons.
Alarm/sensor recording
mode setting
6The VTR mode 1, VTR mode 2 and alarm/sensor
recording mode setting screens include several menu
switches.
nPress the [SHIFT +] or [SHIFT –] button to select the
item you want to set.
• When the cursor arrow reaches the last item (bottom of the
screen) pressing the [SHIFT +] button advances the
display to the next menu switch setting screen.
e.g.: (WARNING BUZZER) [ (SUMMER TIME)
• When the cursor arrow is at the first item (top of the
screen), pressing the [SHIFT -] button will change the
display to the previous menu switch setting screen.
e.g.: (SHARPNESS) [ (POSITION)
7Press the [SET +] or [SET –] button to enter the selected
value.
nTo set more than one menu switch, repeat steps
6 and 7.
8End menu switch setting.
Press the [MENU] button twice.
[The normal screen is restored.
•Set values are stored in the VCR's memory. This
data is retained even when the power is turned off.
COUNT/
CLOCK
TIME
MODE TIMER
REC AL/PL
RESET
MENU SHIFT/TRACKING
SET/V.LOCK
RESET
/CANCEL
[SHIFT +] button
[SHIFT –] button
[MENU] button