46 EN OPERATIONS ON DVD DECK

CANCEL PROG/CHECK

ENTER

1 2 3

4

5

6

7 8 9

0

When Programs Overlap Each Other

If “PROGRAM OVERLAPPED” appears, you have another program overlapping the program you have just made. Confirm with the arrow on “OK”, then press PROG/CHECK. Program Check screen appears and conflicting programs will be highlighted in pink.

Example: Program 3 (you havertw e just made) and Program 4 overlap each other.

1 Confirm the overlapping programs. Overlapping programs appear on the TV screen.

NOTE:

If you do not mind this overlap, press PROG/CHECK to finish the timer

program setting. The program with the lower program number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the unit will return to the normal screen.

2 Press rt to select the desired program to be cancelled or changed.

To cancel the program

Press CANCEL.

●“THE TIMER PROGRAMING SETTING WAS CANCELLED” appears on the TV screen for about 5 seconds, then the normal screen resumes.

To change the program setting

Press ENTER, then go to step 3.

3 Change the program setting.

●Refer to steps 5 – 10 in “Manual Timer Programing” ( pg. 42).

4 Press PROG/CHECK to check if the conflict has been settled. Program check screen appears.

5Engage the unit’s timer mode.

●Refer to step 6 in “Check, Cancel And Change Programs” ( pg. 45).

NOTE:

When any overlaps remain after deletion and modification of programs, Program Check screen remains showing the conflicting programs. In such a case, repeat the procedure above until the conflict is solved.