|
|
| OPERATIONS ON VCR DECK EN 47 | |
|
|
|
|
|
| Basic Playback | 1 Load a cassette. Make sure the window side is up, the rear label | ||
| ||||
| side is facing you and the arrow on the front of the cassette is | |||
|
|
| pointed toward the unit. | |
|
|
| ||
|
|
| ● Do not apply too much pressure when inserting. | |
● Turn on the unit. | ● If the record safety tab has been removed, playback begins | |||
● Turn on the TV and select the video channel (or AV mode). | automatically. | |||
● Slide the TV/CABLE/DBS/DVD switch to DVD. | ● The unit’s power comes on automatically and the counter is reset to | |||
|
|
| 0:00:00. |
|
|
|
|
|
4 5
xVCR/DVD |
| 8 3 |
VCR/DVD |
|
|
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
| 0 |
|
4
3 5
8
2 Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.
3 Find the program start point. If the tape is advanced past the start point, press 3. To go forward, press 5.
4 Press 4 to start playback.
5 Press 8 to stop playback.
●To eject the cassette, press x (VCR EJECT).
Clean the video heads using a dry cleaning cassette—●Rough, poor picture appears while a tape is played back.
●The picture is unclear or no picture appears.
●“USE CLEANING CASSETTE” appears on the screen (only with “SUPERIMPOSE” set to “AUTO”). ( pg. 76)
NOTE:
The heads get dirty in the following cases:
●in an environment prone to extreme temperature or humidity
●in a dusty environment
●flaw, dirt or mold on video tapes
●continuous usage for a long time
Usable cassettesT90
*Compact VHS camcorder recordings can be played on this unit. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any
**This unit can record on regular VHS and Super VHS cassettes. While only VHS signals can be recorded on regular VHS cassettes 1), both
VHS and Super VHS signals can be recorded and played back using Super VHS cassettes.
1)By using the