66 EN EDITING

DV Dubbing (DVD Deck Only)

1 Connect a camcorder or DV equipment to the DV IN connector

on the unit’s front panel.

 

You can dub programs from a camcorder or DV equipment

2 Load a DVD-RAM/RW/R disc on the unit.

3 Press CH +/– to set the channel to “DV DUBBING”.

connected to the unit with a DV cable. The unit’s remote control

allows you the limited control of the connected camcorder or DV

● The “DV DUBBING” controller appears on the TV screen.

equipment functions during dubbing.

● If “

” does not appear on the “DV DUBBING” controller, make

sure the DV equipment is connected correctly.

 

NOTES:

4 Press w e to select

, then press ENTER.

● Use the DV cable VC-VDV 204U for connection.

5 Press rt to select the desired

 

● When you connect a PC to the DV IN connector, we do not assure

sound track, then press ENTER.

 

the normal operation of this unit.

AUDIO 1: Select this to record the

 

 

 

 

original stereo sound played

 

Your unit

back on the connected DV

 

 

equipment.

 

 

AUDIO 2: Select this to record the

 

 

dubbed stereo sound played

 

 

back on the connected DV

 

 

equipment.

 

 

MIX: Select this to record the sound of both “AUDIO 1” and

DV IN connector

“AUDIO 2”.

 

● Note that this selection is not available when the source program is

 

 

recorded in 16BIT (48 kHz) mode.

 

 

6 Press REC MODE repeatedly to set the recording mode.

 

7 Locate the point from where you want to start dubbing, then

Camcorder

stop or pause playback by pressing the following buttons on the

remote control: 4, 5, 3, 8, 9

DV cable

● To play back in slow speed (1/10 of the normal speed), press 9 to

pause playback, then press 3 or 5.

(VC-VDV 204U)

● To play back frame-by-frame, press 9 to pause playback, then press

(not supplied)

9 repeatedly. Each press of 9 advances a frame.

 

 

● To change the playback direction, press 3 or 5.

 

8 Press w e to select

, then press ENTER. The

DV connector

dubbing starts.

 

● Playback on the external DV equipment and recording on the unit should start simultaneously.

DV equipment● When the playback from the beginning is not possible, the “DV DUBBING” controller cannot be used. Perform dubbing without using the “DV DUBBING” controller. ( below)

● To pause dubbing, press w e to select , then press ENTER. Both the unit and the external DV equipment pause dubbing. Pressing 9 on the unit also works the same way.

● To clear the “DV DUBBING” controller from the TV screen, press ON SCREEN.

9 Press 8 on the remote control to stop dubbing.

● Both the unit and the external DV equipment stop dubbing.

NOTES:

● Dubbing copyright guarded programs is not possible.

● Original DV informations such as the recording date and time are not recorded.

● The superimposed indication during the operation or dubbing is not recorded.

● It is not possible to perform dubbing when “VCR]” lights up on the unit. Press VCR] so that “VCR]” lights off.

Performing dubbing without using the “DV DUBBING” controller

A Press CH +/– to set the channel to “DV DUBBING”.

B Press REC MODE repeatedly to set the recording mode.

C Start playback on the external DV equipment slightly before the actual point from where you wish to start dubbing.

D Press 7 on the unit to start recording. Or press and hold 7 and press 4 on the remote control. The dubbing starts.

E When the dubbing ends, press 8 on the unit, then stop playback on the external DV equipment.