68 EN EDITING

 

Edit To Or From Another Recorder

 

Slide the TV/CABLE/DBS/DVD switch to DVD.

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Make connections.

You can use your unit as the source player or as the recording

 

When using this unit as the recording deck

deck.

 

 

A If the another recorder has no S-VIDEO connector, connect the

 

 

 

 

NOTE:

unit’s AUDIO/VIDEO INPUT connectors to the audio/video output

When using another recorder as the recording deck, refer to its

connectors on another recorder.

instruction manual.

B If the another recorder has S-VIDEO connector, connect the

 

AUDIO INPUT and S-VIDEO INPUT connectors to the audio and

Your unit

S-video output connectors on another recorder.

1

● If connecting a unit with an S-VIDEO connector, it is recommended to

 

use the supplied S-Video cable to minimize picture degradation while

 

editing.

Recorder

2 Press VCR/DVD repeatedly to select the recording deck.

3 Press CH +/– to select “L-1” when using this unit as the

TV receiver

 

recording deck.

 

● Set “REAR AUX L-1” to “VIDEO” for the VIDEO input connector, or

 

“S-VIDEO” for the S-VIDEO input connector, depending on the

 

connector being used. ( pg. 74) This setting is also applied to the

 

VCR deck.

 

4 For VCR deck only

 

Set “PICTURE CONTROL” to the appropriate mode. ( pg. 75)

 

5 Press REC MODE repeatedly to set the recording mode.

 

6 Engage the Play mode of the source player.

 

7 Engage the Record mode of the recording deck.

Another recorder

8 Stop recording on the recording deck, then stop playback on the

 

source player.

Player

NOTES:

 

● All necessary cables can be obtained from your dealer.

 

● When you use this unit as the source player for editing, be sure to set

 

“SUPERIMPOSE” to “OFF” before starting. ( pg. 74)

 

● When you select “EDIT” to dub tapes in step 4, be sure to select

 

“AUTO” (or “NORM” when “VIDEO CALIBRATION” is set to “OFF”)

 

after you finish dubbing the tapes.