Advanced operations

See page 17 for button locations.

When using the on-screen bar:

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2 to highlight . 3 Press ENTER.

4 Press Cursor Y/5 repeatedly to select “A-B”.5 Press ENTER at the beginning of the part you want to repeat (point A).6 Press ENTER at the end of the part you want to repeat (point B).

A-B Repeat Playback starts.

7 Press ON SCREEN.

The on-screen bar disappears.

To cancel

Select “OFF” in step 4, then press ENTER.

NOTE

•When playing back a DVD VIDEO, A-B Repeat Playback is possible only within the same title.

•“A-B” cannot be selected during Program and Random Playback.

•“A-B” cannot be selected during playback with PBC function.

Tray lock

You can lock the tray and prohibit the unwanted disc ejection.

On the center unit ONLY:

While the system is on standby mode, press 0 , with 7 pressed and held.

Press and hold

•The system turns on and “LOCKED” appears on the display window.

•If you try to eject the disc, “LOCKED” appears to indicate that the tray is locked.

To cancel

Carry out the same operation again.

•The system turns on and “UNLOCKED” appears on the display window.

Balance setting

You can adjust the balance between the front left and front right speakers.

NOTE

•This function also takes effect for the sources other than DVD.

•Before you start operation;

There is a time limit when doing the following steps. If the setting is cancelled before you finish, start from step 1 again.

1 Press SETTING, with SHIFT pressed.

Example:

B A L C T R

2 Press Cursor 3/2 to make an adjustment or selection.

Example:

B A L R -- 5

The adjustment display automatically disappears a few seconds later with the current setting.

27