Advanced operations

See page 17 for button locations.

7For MP3:

During playback or while stopped For JPEG:

While stopped

1 Press Cursor 3/2/Y/5 to select the desired group/track/file.

•For MP3, playback starts from the selected track.

•For JPEG, proceed to perform the following operation.

2 Press DVD/CD3 or ENTER.

•Track playback/slide-show starts from the selected track/ file.

•When you press ENTER for JPEG, only the selected file is played back.

To skip the file during playback

Press x/4 or Cursor 5/Y.

NOTE

•You can also check playback information on the display window. (See page 14.)

•Some group, track and file names may not be displayed correctly depending on recording conditions.

•The order of groups, tracks and files may be displayed differently from the order displayed on your personal computer.

Resume playback

When Resume Playback is set to “ON” (see page 30) and you stop playback by the following operations, the position where playback has been stopped is stored. (“RESUME” appears on the display window.)

•Turning off the power (see page 10)

•Pressing 7 once

•Changing the source (see page 11)

To start playback from the stored position

(“RESUME” disappears.)

•Press 3 (play button) on the remote control or the center unit.

•Select DVD as the source again if you changed the source.

To clear the stored position

Press 7 again or open the disc tray.

Selecting a view angle

7During playback of a disc containing multi-view angles

When using the ANGLE button:1 Press ANGLE, with SHIFT pressed.

Example:

The first view angle is selected out of 3 view angles recorded.

2 Press ANGLE repeatedly, with SHIFT pressed or Cursor Y/5 to select the desired view angle.

When using the on-screen bar:

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2 to highlight . 3 Press ENTER.

4 Press Cursor Y/5 to select the desired view angle.

5 Press ENTER.

6 Press ON SCREEN.

The on-screen bar disappears.

22