Introduction
Name of Parts and their Functions
Front/Bottom/Side panel
AJ
I
B
|
| H |
C |
|
|
D | IRIS | G |
E | VIDEO | F |
DC | ||
|
| |
|
| LEVEL |
ABack focus adjustment ring
This ring switches between back focus adjustment and lens mounting method. When adjustment is required, loosen the back focus fastening screw J by turning it
BLens Mount
To attach the lens. This is suitable for
(A Pg. 20)
CCamera-mounting bracket fixing screws (x2: M2.6 x 6 mm)
Be sure to use a 6 mm long screw.
Note:
●Do not use a screw that is longer than the specified length. It may damage the internal parts.
D[IRIS] Iris Terminal
This is connected to an automatic iris control lens.
E[VIDEO,DC] Iris Selector Switch
This should be set according to the type of lens if an automatic iris control lens is used.
VIDEO | : | In case of lens with EE amp |
DC | : | In case of lens without EE amp |
(Default setting: DC) (A Pg. 20)
F[LEVEL] Iris Level Adjustment Dial
This adjusts the iris level of the automatic iris control lens. Usually, adjustment is not required. When it is necessary, adjust the iris level according to the condition of the object. (A Pg. 30)
To darken | : |
To brighten | : Clockwise direction (Towards H) |
GRotation-preventive hole
Make use of this
HCamera-mounting screw hole (1/4-20UNC)
Use this hole when mounting the camera onto a fixer, pan/tilt unit and the like. Use a screw shorter than 7 mm. (A Pg. 25)
Note:
●Do not use a screw that is longer than the specified length. It may damage the internal parts.
ICamera-mounting bracket
The bracket has been attached on the bottom of the camera before shipment. It can also be attached on the top according to the circumstance. (A Pg. 26)
J[BF LOCK] Back focus fastening screw
This serves to fix the back focus adjustment mechanism. (A Pg. 28)
12 | 13 |