Installation
Mounting the Camera
Selecting a mounting method
vMount directly to the ceiling or on the wall (A page 13)
vMounting the Camera Using the Conduit Hole at the Bottom of the Base (A page 19)
vMounting the Camera Using the Conduit Hole at the Side of the Base (A page 21)
vMounting the Camera using the Electrical Box (A page 22)
Memo When mounting the camera to the ceiling, ensure to wear safety glasses to protect the eye from any falling objects.
Mounting the camera directly to the ceiling or on the wall
When mounting to a wall, replace areas indicated as "ceiling" in the procedures by "wall".
mPreparing the camera
1Remove the dome cover (screws x3)
2Remove the inner dome from the catches (two locations)
The inner dome can be easily removed by turning it about 45 degree and grip from both sides near the catches as illustrated in the diagram.
| . |
1 | Doom cover |
Wrench (supplied)
2 | Inner dome |
Catches ( 
2)
Fall prevention wire
.
13