Installation
Mounting the Camera (Continued)
mMounting the Camera Unit
1Make a hole (Φ30 mm) in the ceiling using the template provided
2Mount the fall prevention wire for connecting the camera unit to the ceiling
The fall prevention wire is not provided. Prepare a wire, taking into due consideration the length, strength, pull and material (insulating).
①Remove the fall prevention wire fastening screw on the bottom of the camera unit to mount the fall prevention wire.
②Mount the fall prevention wire at a structurally strong location.
3Mount the camera unit to the ceiling
Pull the cables from the ceiling and camera towards the lens as illustrated in the diagram, align the (ñ) mark to the shooting direction and mount the camera to the ceiling. Align the (ñ) mark upwards when mounting the camera on the wall.
| . |
1 | 30 mm |
| Fall prevention wire (not supplied) |
Camera unit | Fall prevention wire |
| |
| 2 |
| 8 mm |
| 2 mm |
| 6 mm |
| and below |
| 12 mm |
| and below |
Shooting direction | 4.1 6.5 mm |
mark |
|
3
4 mm 
2 (not supplied)
Note The screws for mounting the camera are not provided. Use a suitable type of screws according to the material of the mounting location.
14