Installation
mConnecting the cable
For safety reasons, turn on the power only after all the connection is complete. The status indicator lights up when the camera is turned on.
1Connect the coaxial cable (A page 10)
Lower the protection cover and connect the connectors.
Upon connecting, restore the protection cover to cover the connectors. This will isolate and protect the metallic parts of the connectors.
2Connect the power supply cable (A page 11)
3Wrap insulation tapes around the connecting parts of the power supply cables
Memo Wrapping insulation tapes will improve future work conditions, as well as reduce penetration by noise and other objects.
4Wrap the insulation tape
5Push the connector of the connected coaxial cable back to the ceiling.
.
| 3 |
| Solder or caulk |
| 2 |
1 | Insulating tape |
Protection | 4 Bind insulating tape |
| |
cover | Power supply cable |
| |
Coaxial |
|
cable |
|
.
15