Controls and Features
7Front Panel
1
2 | 3 4 | 5 6 7 | 8 | 9 | p |
1 Tally lamp | 4 MENU control |
This lamp is controlled by the tally function of the |
|
MAKE/TRIGGER terminal. |
|
☞ “How to Use the MAKE/TRIGGER Terminal” on pages | Displays or closes a menu screen. |
18 and 19 |
|
•You can set the lamp color to red or green.
☞“TALLY SELECT” on page 14, “How to Use the MAKE/TRIGGER Terminal” on pages 18 and 19
2CHROMA (
)/PHASE (
) button
Activates the Chroma (picture color density) adjustment mode or the Phase (picture hue) adjustment mode. Each time you press the button, the adjustment modes change.
To adjust the value, move the MENU control (4) to 
/
.
NOTES:
•CHROMA is not adjustable when the B/W (50 Hz/60 Hz) signal is input.
•PHASE is not adjustable when the PAL signal or the B/W (50 Hz/60 Hz) signal is input.
3CONTRAST (
)/BRIGHT (
) button
Activates the picture contrast adjustment mode or picture brightness adjustment mode. Each time you press the button, the adjustment modes change.
To adjust the value, move the MENU control (4) to 
/
.
While a menu screen is displayed, selects or adjusts the menu items by moving the control to 
/
/
/
.
☞ “Basic Menu Operations” on pages 9 and 10
To display the
Press the CHROMA/PHASE button (2) while moving the MENU control to 
.
To select the channel of the audio output from the audio output terminal:
When SD SDI signal (including EMBEDDED AUDIO signal) is input, you can select the channel of the audio signal output from the audio output terminal. Move the MENU control to 
/
to select the audio output mode while no menu screen is displayed.
•If you change the audio output mode, the channel of the audio signal output from the audio output terminal changes.
☞“6 Audio output terminals” on page 7
•Set the group of the audio output modes you want to select beforehand.
☞“E. AUDIO GROUP” on page 14
4