JVC TM-1650SU manual HOW to Handle Basic Operations, Picture Adjustment

HOW TO HANDLE BASIC OPERATIONS

BASIC OPERATION

1. Press the POWER switch to turn on the power.

gON : Power turns ON. (Power indicator: lit)

STATUS indication (PAL or NTSC)

PAL

ON

OFF

POWER

GOFF : Power turns OFF. (Power indicator: unlit)

2. Press the INPUT SELECT button to choose input.

RGB/	B	A
COMPO.

INPUT SELECT

Select video/audio signals input to terminals on the rear panel. The selected INPUT SELECT indicator lights in green.

INPUT	Terminals on the rear panel
SELECT
button	Video signal input	Audio signal input
1 Input A	VIDEO A terminal	AUDIO A terminal
(VIDEO)
2 Input B	VIDEO B terminal
(VIDEO)
		AUDIO B terminal
3 Input B	VIDEO B (Y/C) terminal
(Y/C)
4 Input	RGB/COMPO. terminal	AUDIO RGB/COMPO.
RGB/
	(RGB/Y, B-Y, R-Y)	terminal
COMPO.

* RGB or COMPONENT signals can be selected in the <MENU> screen.

About the STATUS indication

With the COLOR SYSTEM setting set to AUTO mode, when you turn on the power or select inputs, the color system indication appears for about

3 seconds on the screen while PAL or NTSC signals are being detected.

It does not appear when receiving a B/W signal or when no signal is input. Refer to page 8 for more information about COLOR SYSTEM setting and page 10 for more information about STATUS indication setting.

3. Press the VOLUME/SELECT button to adjust the speaker volume.

00 ~ 50

– +

Press this button to display the speaker volume level on the screen.

+ : The Built-in speaker volume is increased. (00 = 50)

VOLUME/SELECT	– :The Built-in speaker volume is decreased. (50 = 00)
	* Screen indication will disappear about 10 seconds after
	operating.

PICTURE ADJUSTMENT

1. Press select button corresponding to the item you

want to adjust.	The item you select is displayed on the screen.
	1	PHASE (	)	: Phase control
	2	CHROMA (	)	: Chroma control
PHASE CHROMA BRIGHT CONTRAST 3 BRIGHT (			)	: Brightness control
	4	CONTRAST (		) : Contrast control

2. Adjust with the VOLUME/SELECT button.

VOLUME : 20

– +

–40 ~ +40

PHASE : 00

– +

VOLUME/SELECT

Items	VOLUME/SELECT button
	–	+
PHASE	reddish	greenish
(Phase)
CHROMA	lighter	deeper
(Chroma)
BRIGHT	darker	brighter
(Brightness)
CONTRAST	lower	higher
(Contrast)

* Screen indication will disappear about 10 seconds after operating.

Notes:

Phase control is effective only in the NTSC color system mode.

Chroma control is not effective when receiving B/W or when no signal is input. (Except when a component signal is input.)

When CHROMA is adjusted to “– 40,” the picture becomes less colorful. "NO EFFECT" is displayed (for about 3 seconds) when your selected function has no effect.

7