JVC TM-1650SU manual HOW to Initialize the Setting, Press the Power Switch to turn the power OFF G

HOW TO INITIALIZE THE SETTING

SCREEN DISPLAY AND SELECTIONS IN THE <SET-UP MENU> RESET MODE

You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and the volume level to their factory-set (initial) values.

1.Press the Power ( ) Switch to turn the power OFF (G).

ON

OFF

POWER

<SET-UP MENU> RESET screen

<SET–UP MENU> RESET

Are	you	sure ?
“Yes”	then	<CONTRAST>
“No”	then	<+> or <–>

2.While pressing both MENU button and PHASE ( ) button, press the Power ( ) switch to turn the power ON (g).

Initial settings

Sorts	Functions (Items)	Initialization
		(setting)
	SHARPNESS	00

PHASE MENU

ON

OFF

POWER

The <SET-UP MENU> RESET screen is displayed.

*The screen automatically disappears when no operation is performed after about 5 minutes.

Note:

The <SET-UP MENU> RESET screen will not be displayed if the MENU or PHASE buttons are pressed for a very short time. Keep pressing them until the display screen appears.

screen	COLOR TEMP.	6500
	COLOR SYSTEM	AUTO
<MENU>	ASPECT RATIO	4–3
	RGB/COMPONENT	RGB
	COMPO. LEVEL	00
	BLUE CHECK	OFF
	H. POSITION	00
screen	V. POSITION	00
	WHITE BALANCE
	R. CUT OFF	00
	G. CUT OFF	00

3. Setting

Initialization is required.

	Press the CONTRAST ( ) button.
	* Initialization is completed, and the <SET-UP MENU>
CONTRAST	RESET screen disappears.

Initialization is not required.

Press the VOLUME/SELECT [+] or [–] button.

– + * Initialization is aborted, and the <SET-UP MENU>

RESET screen disappears.

VOLUME/SELECT

MENU>	B. CUT OFF	00
	R. DRIVE	00
UP	B. DRIVE	00
	CONTROL LOCK	OFF
<SET-
	STATUS DISPLAY	ON
	INPUT REMOTE	OFF
	ASPECT REMOTE	OFF
adjustment	PHASE	00
	CHROMA	00
	CONTRAST	00
Picture	BRIGHT	00
Volume	VOLUME	20

12