JVC TM-H150CG manual How to Use Menu, Function, Contents, and the Adjustment Range of Each Item

How to Use MENU

	<MENU>
APERTURE			: 00
ADJ. BAR POSI.			: LOWER
COLOR TEMP.			: 9300
COLOR SYSTEM			: AUTO
COMPO. LEVEL			: 00
RUSH DELAY			: STD.
		EXIT

CHROMA CONTRAST VOLUME/SELECT MENU

PHASE BRIGHT

Function display of the button varies depending on the selected item.

Buttons Displays Functions

fi∞ Selects the items in forward rotation.

%5 Selects the items in reverse rotation.

VOLUME/	+	Increases the value (up to the maximum).
SELECT(+)	3	Selects the setting (value) in forward rotation.
VOLUME/	–	Decreases the value (up to the minimum).
SELECT(–)
	2	Selects the setting (value) in reverse rotation.
MENU	EXIT	Exits from MENU.

7Function, Contents, and the Adjustment Range of Each Item

APERTURE

Adjusts the picture aperture level.

•00 “ +40

ADJ. BAR POSI.

Selects the level bar position on the screen which appears when adjusting picture or volume.

•UPPER

• LOWER VOLUME : 20 UPPER

VOLUME : 20 LOWER

COLOR TEMP.

Selects the color temperature.

•9300

•6500

COMPO. LEVEL

Adjusts the component level of the monitor for the component signal or the SDI signal.

•–40 “ +10

NOTE:

When inputting the component signal or the SDI signal, check if “COMPO. LEVEL” is adjusted properly for the standard color bar currently used. For details, see page 5.

RUSH DELAY

Sets the delay time between when the stand-by button is pressed and when the monitor actually turns on.

•STD.: Power turns on about 1 second after the stand-by button is pressed.

•SLOW: Power turns on about 3 seconds after the stand-by button is pressed.

NOTE:

It is recommended to apply “SLOW” to some of the monitors if you need to turn on multiple monitors at the same time. You can control the rush current of the entire system.

COLOR SYSTEM

Selects the color system.

•AUTO: Selects NTSC or PAL automatically depending on the input signal.

•NTSC: Keeps the NTSC color system.

•PAL: Keeps the PAL color system.

NOTE:

Normally select “AUTO.” If the input signal is unstable, select “NTSC” or “PAL.”

12