TV / DTV Key

If there is no connected VCR device, The TV/DTV key is used to switch TV and DIGITAL TV modes. When the set-top box is in TV mode, the TV scart is not switched and the TV operates in analog mode.

When the set-top box is in DIGITAL TV mode, this time the TV scart is switched on and the TV is switched to AV/RGB mode. And also, when there is no menu on the screen , pressing TV/DTV key will manually toggle the set top box between VCR mode and TV mode. In VCR mode set top box will display the output of VCR device , In TV mode set top box displays its own outputs.

If box scart mode is not changed by pressing TV/ DT V key , scart mode will be automatically detected. (For example if a dvd player is connected to VCR scart and powered on , then the set top box will immediately switch to VCR mode. The set top box will switch to TV mode if dvd player is switched off )

ADVANCED OPERATIONCONFIGURING YOUR RECEIVER

Many aspects of your receiver can be set up to reflect your circumstances and preferences. The Configuration menu screen is accessed from the Main Menu. Press the [MENU] key to display the Main Menu and the [DOW N] key to highlight Configuration, then press [OK] to display the Configuration menu screen.

The various configuration functions are displayed in a list, along with a quarter-screen image of the currently selected channel. You can select a function byhighlighting the corresponding menu line with the [UP] or [DOWN] keys. There are seven configuration functions.

MENU

Use LEFT/RIGHT buttons to toggle System Menu Language. Press OK on the preferred language.

AUDIO LANGUAGE

Digital terrestrial television channels can broadcast simultaneous soundtracks in more than one language. This function selects which language soundtrack you will hear when switching to a channel broadcasting with multiple soundtracks. See also Section 2 - EVERYDAY OPERATION - Audio Control.

Hi ghl ight the Audio Language l ine i n the Configuration menu and use the [LEFT] or [RIGHT] keys to cycle through the language options .

Return No Menu to normal TV viewing by pressing the [MENU] key.

DOLBY DIGITAL

Enable / disable Dolby Digital by means of [LEFT] or [RIGHT]. Dolby digital is only available if you have a home entertaintment system.”Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

SUBTITLE

Digital terrestrial television channels can broadcast with subtitles displayed on-screen for the hard-of- hearing. This function selects the desired subtitle language and enables the automatic display of subtitles whenever subtitle information is broadcast.

Highlight the Subtitle line in the Configuration menu and use the [LEFT] or [RIGHT] keys to cycle through the language options .

Return NO MENU to normal TV viewing by pressing the [MENU] key.

TVTYPE

Digital terrestrial television channels can broadcast programmes in a widescreen format which must be output differentlyto normal and widescreen TV sets. This function tells the receiver the screen format of the TV connected so that broadcasts are displayed correctly.

Highlight the TV Type line in the Configuration menu and use the [LEFT] or [RIGHT] keys to select 4:3 if you have a standard TV set connected or 16:9 if it is a widescreen TV. This function duplicates the selection made at the time of first installation (see 1 - PREPARATION - Tuning In) and can be used if you change TV sets.Return to normal TV viewing by pressing the [MENU] key.

VIDEO OUT

The receiver can output either an RGB/Y/C,Video signal from the TV SCART on the rear panel. Although the RGB format results in a better quality picture, not all equipment - particularly some VCRs - can cope with an RGB signal (see Appendix C - Connecting A VCR).

- 12 -