Playing Back a Tape

To insert a tape

You can play back type I tapes only.

Push

Insert

Close

With the side you want to play back facing up

With the tape side facing outside

To activate TAPE To start:

To stop:

as the source:

 

 

 

Playing Back a Portable Audio Device

Remote

ONLY

By using QP Link (Quick Portable Link), you can easily start playing back a portable audio device connected to the AUX jack.

•Make sure to set the volume of your portable audio device loud enough so that the System can detect the sound signal.

To activate QP Link

QP LINK

QPL ON

(Initial setting)

QPL OFF

When QP Link is activated, connecting a portable device to the AUX jack and starting playback performs the following:

•While listening to another source...

Changes the source to AUX automatically. (If you change from AUX to another source, QP Link will be canceled.)

•While the System is on standby...

Turns on the System and activates the AUX source automatically (except when the display is turned off).

(in the TAPE mode)

S.TURBO

QP Link

Bubbles appear when QP Link works.

To fast-forward/fast-reverse the tape:

While QP Link plays back the device...

Before or after playback...

Fast-forwards the tape.

Fast-reverses the tape.

To change the tape running direction, eject the tape while playback is stopped, then insert it again with the side you want to play facing up.

S.TURBO

QP Link

Bubbles disappear when the sound signal stops or is too weak.

10