Additional Information
Learning More about This System
Daily Operations—Playback (see pages 7 to 10)
Listening to the Radio:•If you store a new station into an occupied preset number, the previously stored station in that number will be erased.
•When you unplug the AC power cord or if a power failure occurs, the preset stations will be erased in a few days. If this happens, preset the stations again.
Playing Back a Disc:•When using an 8 cm disc, place it on the inner circle of the disc tray.
•This System cannot play “packet write” discs.
•For MP3 playback...
–MP3 discs require a longer readout time than regular CDs. (It depends on the complexity of the group/file configuration.)
–Some MP3 files cannot be played back and will be skipped. This results from their recording processes and conditions.
–When making MP3 discs, use ISO 9660 Level 1 or Level 2 for the disc format.
–This system can play back MP3 files with the extension code <.mp3> (regardless of the letter
–It is recommended that you make each MP3 file at a sampling rate of 44.1 kHz and at a bit rate of 128 kbps. This System cannot play back files made at a bit rate of less than 64 kbps.
–Playback order of MP3 tracks may be different from what you have intended when recording (see below). If a folder does not include MP3 tracks, they are ignored.
–This System plays back MP3 tracks as follows.
Hierarchy
Level 1 | Level 2 | Level 3 | Level 4 | Level 5 |
| 02 | 04 | 05 | 9 |
ROOT |
| 3 | 7 | 10 |
03
4 
8
1 | } | 01 | 5 | 06 | 11 | |
6 | 12 | |||||
2 |
|
|
|
01Group with its play order
1 MP3 track with its play order
•This System can recognize up to 999 tracks in a disc. Also, the System can recognize up to 256 tracks per group and up to 99 groups in a disc.
–Even if a folder contains no playable files, the folder is also counted in the total folder number.
–Playable files which do not belong to any groups are handled as Group 1.
•It is not recommended to use the
•If you start playback with no cassette inserted, the System tries to play back without displaying a notice.
Playing Back a Portable Audio Device:•When QP Link fails due to a weak sound signal from the AUX jack, Auto Standby may turn the System off even if you can hear the sound from the speakers.
In such cases, adjust the volume level of the component louder so that the System can detect the sound signal properly.
•Changing from AUX to another source while QP Link works will deactivate QP Link temporarily.
In this case, the following reactivates QP Link:
–Pressing QP LINK on the remote control
–Unplugging the component from the AUX jack, then plugging it in again
•If you press STANDBY/ON 
to turn the System off or if preset Timer turns the System off while QP Link works, the System will deactivate QP Link temporarily.
In such cases, the following reactivates QP Link:
–When the sound signal from the AUX jack stops or is too weak for about 30 seconds after the System is turned off
–When you turn on the power again
•QP Link may start working when you just plug in the component to the AUX jack or unplug it. This is not a malfunction.
•10 seconds before preset Recording Timer starts working, the System will deactivate QP Link temporarily until the following happens:
–Recording
–Recording is stopped manually.
Daily Operations—Sound&Other Adjustments
(see pages 11 and 12)Adjusting the Volume:• Be sure to turn down the volume before connecting or putting on the headphones.
Adjusting the Sound:•This function also affects the sound through the headphones.
•This function does not affect recording.
Setting the Clock:•“0:00” will flash on the display until you set the clock.
•The clock may gain or lose 1 to 2 minutes per month. If this happens, reset the clock.
18