Playback automatically starts if the selected source is ready.
3 Adjust the volume.
4 Operate the target source as explained later.
To turn off (standby) the unit
Select the source.
2
Turn on the power.
The STANDBY lamp on the main unit turns off.
Without pressing STANDBY/ON ...
• The System turns on by pressing one of the source buttons.
• The System turns on and activates the AUX source by starting playback on an external device when QP Link is activated. (See page 10 for details.)
1
In this manual, the operations using the remote control are explained mainly; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and symbol.

Daily Operations—Playback

1

SET

QP LINK

CANCEL

2

DIMMER

 

7

4,¢

NUMBER

PRESET/GROUP

SELECT

DOWN,UP

 

FM MODE/

 

PLAY MODE

3

1

2

STANDBY/ON

STANDBY/ON The STANDBY lamp on the main unit lights in red.

• A small amount of power is always consumed even while on standby.

You can reduce power consumption by pressing DIMMER to turn the display off while on standby.

3VOLUME

4

•When the display is turned off, QP Link does not work.

For private listening

Connect a pair of headphones to the PHONES jack on the main unit. The sound will no longer come out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.

•Disconnecting the headphones will activate the speakers again.

DO NOT turn off (standby) the System with the volume set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the System or start playback.

7