Listening to the Radio
To select the band—FM or AM
To tune in to a station
While FM or AM is selected...
Remote control: | Main unit: | ||||||
|
|
|
|
|
| ||
|
|
|
|
| 1 sec. |
| |
| 1 sec. |
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.
•When you repeatedly press the button, the frequency changes step by step.
To stop searching manually, press either button.
To preset the stations | Remote |
ONLY | |
|
You can preset 30 FM and 15 AM stations.
1Tune in to a station you want to preset.
•You can also store the monaural reception mode for FM preset stations if selected.
2Activate the preset entry mode.
•Finish the following process while the indication on the display is flashing (5 seconds).
3Select a preset number for the station.
Ex.:
To select preset number 5, press 5.
To select preset number 15, press +10, then 5. To select preset number 30, press +10, +10, then 10.
If the received FM station is hard to listen
Remote
ONLY
The MONO indicator lights on the display. Reception will improve though stereo effect is
To restore the stereo effect, press the button again (the MONO indicator goes off).
4Store the station.
To tune in to a preset station | Remote |
ONLY | |
|
1Select a band—FM or AM.
2Select a preset number you have stored.
11