Setting the Clock

Remote

ONLY

Without setting the built-in clock, you cannot use the Daily Timer (see page 33) and Sleep Timer (see the right column).

•To exit from the clock setting, press CLOCK/TIMER as required.

•To go back to the previous step, press CANCEL.

1Activate the clock setting mode.

•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected (see page 33).

2Adjust the hour.3Adjust the minute.

Now the built-in clock starts working.

To check the current clock time during play

Clock

Source information

Turning Off the Power

Remote

Automatically ONLY

To turn off the System after playback is over— Auto Standby

A.STANDBY

Canceled

(at the same time)

When Auto Standby is in use, the A.STANDBY indicator lights on the display. When the disc play stops, the A.STANDBY indicator starts flashing. If no operation is done for about 3 minutes while the indicator is flashing, the System turns off (in standby) automatically.

•Auto Standby does not work while you are listening to radio (FM/AM) or the external component (AUX/USB).

To turn off the System after a certain period of time—Sleep Timer

1Specify the time (in minutes).

(at the same time)

• SLEEP indicator also lights up on the display.

2Wait until the set time goes off.To check the time remaining until the shut-off time

(at the same time)

(at the same time)

 

• While playing a DVD/MP3/DivX, you cannot check the

• If you press the button repeatedly, you can change the

current clock time (see page 9).

shut-off time.

19