To preset stations manually—Manual Presetting
You need to preset stations separately for the FM and AM (MW/LW) bands.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
On the remote control ONLY:
1 Tune in to the station you want to preset.
• See “Tuning in to a Station” on page 11.
Tuning in to a Preset Station
On the remote control ONLY:
1 Press FM/AM to select the band. | FM/AM |
The unit automatically turns on and tunes in to the previously received station (either FM or
•Each time you press the button, the band alternates between FM and AM (MW/LW).
2
3
Press SET.
Press UP or DOWN to select a
SET
UP
UP
2 Press UP or DOWN to select a preset number.
DOWN
To tune a preset number directly using the number buttons
On the remote control ONLY:
4
preset number.
Press SET again.
DOWN
SET
Pressing the number button(s) allows you to select a preset number you want. Ex.: For preset number 5, press 5.
For preset number 15, press +10, then 5.
For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
1 2 3
4 5 6
7 8 9
10+10
The tuned station in step 1 is stored in the preset number selected in step 3.
•Storing a new station on a used number erases the previously stored one.
When you unplug the AC power cord or if a power failure occurs
The tuner preset stations will be erased in a few days. If this happens, preset the stations again.