JVC UX-P400 Listening to the Radio, English, To set the AM tuner interval spacing ONLY, Fm Am

Listening to the Radio

Main Unit

To set the AM tuner interval spacing ONLY

Before operating the tuner, it is required to select the appropriate AM space interval used for your area.

1Select the AM band.

FM AM

2Turn off the power.

STANDBY/ON

To select the band (FM or AM)

FM AM

To tune in to a station

While FM or AM is selected...

Remote control:	Main unit:
2 sec.		2 sec.
	DOWN	UP

English

3Select the appropriate AM space interval for your area.

•You can only use the button and the control on the front panel

VOLUME

10 K

(10 kHz interval)

9 K

(9 kHz interval)

While holding...

.

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.

•When you repeatedly press the button, the frequency changes step by step.

To stop searching manually, press either button.

		Remote
If the received FM station is hard to listen		ONLY
FM	The MONO indicator lights on the display.
MODE	Reception will improve though stereo

effect is lost—Monaural reception mode. To restore the stereo effect, press the button again (the MONO indicator goes off).

To preset the stations	Remote
	ONLY

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset.

•You can also store the monaural reception mode for FM preset stations if selected (see above).

2Activate the preset number entry mode.

SET

•Finish the following process while the indication on the display is flashing.

9