JVC UX-P7 manual Getting Started, Supplied Accessories, Connecting Antennas, FM antenna

Getting Started

Supplied Accessories Connecting Antennas

Make sure that you have all the following items.

The number in the parentheses indicates the quantity of the pieces supplied.

•AM loop antenna (1)

•FM antenna (1)

•Remote control (1)

•Batteries (2)

•Speaker cords (2 sets)

If anything is missing, consult your dealer immediately.

Putting the Batteries into the Remote Control

FM antenna

ANTENNA

EXT
AM	LOOP
75
FM
COAXIAL

FM antenna (supplied)

Insert the batteries — R6(SUM-3)/AA(15F) — into the remote control, by matching the polarity (+ and –) on the batteries with the + and – markings on the battery compartment.

When the remote control can no longer operate the unit, replace both batteries at the same time.

1Attach the FM antenna to the FM 75 Ω

COAXIAL terminal.

2Extend the FM antenna.

3Fasten it up in the position which gives you the best reception, then fix it on the wall, etc.

1
			About the supplied FM antenna
		The FM antenna supplied with this unit can be used as temporary
		measure. If reception is poor, you can connect an outdoor FM
		antenna.
		To connect an outdoor FM antenna
	R6(SUM-3)/AA(15F)	Before connecting it, disconnect the supplied FM antenna.
	2		Outdoor FM antenna
			(not supplied)
3
			Coaxial cable
			ANTENNA
			EXT
			AM	LOOP
•	DO NOT use an old battery together with a		FM	75
			COAXIAL
	new one.
•	DO NOT use different types of batteries
	together.
•	DO NOT expose batteries to heat or flame.
•	DO NOT leave the batteries in the battery	A 75	Ω antenna with coaxial type connector should be
	compartment when you are not going to use
		used.
	the remote control for an extended period of
	time. Otherwise, it will be damaged from
	battery leakage.
		– 6 –