To remove the speaker grilles
The speaker grilles are removed as the illustrations below.
HolesProjections
Speaker grille
To remove the speaker grille, inserting your fingers at the top of the speaker grille, pull towards you. Then pull the bottom towards you.
To attach the speaker grille, put the projections of the speaker grille into the holes of the speaker.
To connect audio equipment with an optical digital input terminal
You can record CD sound onto the connected digital equipment.
Protective plug
OPTICAL
DIGITAL
OUT
Before connecting the other equipment, remove the protective plug from the terminal.
|
| Audio equipment |
| ||
|
| with an optical digital |
| ||
To optical digital input |
| input |
| ||
|
|
|
|
|
|
Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the OPTICAL DIGITAL OUT terminal.
Connecting Other Equipment
You can connect both of the analog and digital equipment.
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit.
•DO NOT connect any equipment while the power is on.
•DO NOT plug in any equipment until all connections are complete.
To connect audio equipment
Be sure that the plugs of the audio cords are colored: White plugs and jacks are for left audio signals, and red ones for right audio signals.
| OUT |
AUX R | L |
| IN |
VOLTAGE
SELECTOR
230V
127V
Voltage mark
220V
110V
To audio output
Use a screwdriver to rotate the voltage selector so the voltage number the voltage mark is pointing at is the same as the voltage where you are plugging in the unit. (See the back
To audio input
Audio equipment
cover page.)
DO NOT plug in before setting the voltage selector
By using audio cords (not supplied), connect:
•Between the audio input jacks on the other equipment and AUX OUT jacks: For recording on the other equipment.
•Between the audio output jacks on the other equipment and AUX IN jacks: For playing the other equipment.
on the rear of the unit and all connection procedures are complete.
Now, you can plug the AC power cord.
IMPORTANT: Be sure to check all connections to be done before plugging the AC power cord into a wall outlet.
– 8 –
