English 11

4Briefly press the play/stop button Eon the baby unit again to stop playing of the lullaby. (Fig. 24)

Note: If you press the lullaby button K too long, no lullaby will be selected.

Belt and neck strap

If the batteries of the parent unit are sufficiently charged, you can take the unit with you inside and

outside the house if you attach the unit to your belt or waistband with the belt clip or if you hang it round your neck with the neck strap.This allows you to monitor your baby while you are moving around.

Connecting the belt clip

1Insert the small pin on the back of the belt clip into the opening on the back of the parent unit (1).Turn the belt clip to the left (2) until it locks into position (‘click’). (Fig. 26)

Disconnecting the belt clip

1Turn the belt clip to the right (in the direction of ) and take it out of the opening (2). (Fig. 27)

Connecting the neck strap

1Insert the small pin at the end of the neck strap into the opening on the back of the parent unit (1).Turn the neck strap to the left (2) until it locks into position (‘click’). (Fig. 28)

Disconnecting the neck strap

1Turn the neck strap to the right (in the direction of ) and take it out of the opening (2). (Fig. 29)

Reset function

This function allows you to reset the parent unit and baby unit to the default settings.You can use this function if problems occur that cannot be solved by following the suggestions in chapter ‘Frequently asked questions’.You have to reset each unit separately.

1Press and hold the on/off button 3for 2 seconds to switch on the unit. (Fig. 30)

2Press and hold the volume – button as soon as the connection light on the unit starts to burn. (Fig. 31)

,The unit has now been reset to the default factory settings.

Now do the same for the other unit.

Default settings

Parent unit

-Loudspeaker volume: 1

-Microphone sensitivity: 3

-Sound alert: on

-Temperature alert: on Baby unit

-Loudspeaker volume: 3

-Nightlight: off

-Lullaby: 1

-’Temperature low’ alert: 14°C

-’Temperature high’ alert: 30°C

Page 11
Image 11
Philips SCD489 manual Belt and neck strap, Connecting the belt clip, Disconnecting the belt clip, Connecting the neck strap