– 13 –Switching to a Program Type of Your Choice
Temporarily
By receiving EON (Enhanced Other Networks) data sent by
FM RDS stations, the EON function allows the unit to switch
temporarily to a broadcast program of your choice (TA,
NEWS, and INFO) from a different station.
• The EON function only works when you are listening to a
preset FM RDS stations providing EON data.
• The EON indicator lights while receiving a station with the
EON data.
To activate the EON function
REMEMBER you must preset FM RDS stations to use the
EON function. If not yet done, see page 11.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
On the remote control ONLY:
1
Press PTY/EON until “EON” and
“SELECT” alternately appear on
the display.
• Each time you press the button, RDS operation mode
changes as follows:
2
Press ¢ or 4 until the
EON data type you want
appears on the display.
The selected EON data type indicator
also flashes.
• Each time you press the button, the EON data types
change as follows:
TA: Traffic announcement
NEWS:News
INFO: Program the purpose of which is to impart advice
in the widest sense.
OFF: The EON function is canceled. The EON data
type indicator (TA, NEWS, INFO) goes off.
3
Press PTY/EON once again.
The EON data type indicator stops flashing
and remains lit.
Now, the EON function is activated. See
“How the EON function actually works.”
How the EON function actually works:
CASE 1
If there is no station broadcasting the program you
have selected
The unit continues tuning in the current station.
«
When a station starts broadcasting the program you have
selected, the unit automatically switches to the station. The
indicator of received PTY code starts flashing.
«
When the program is over, “EON END” appears on the
display, and the unit goes back to the previously tuned
station, but the EON function still remains activated.
CASE 2
If there is a station broadcasting the program you have
selected
The unit tunes in the program. The indicator of received
PTY code starts flashing.
«
When the program is over, “EON END” appears on the
display, and the unit goes back to the previously tuned
station, but the EON function still remains activated.
CASE 3
If the FM station you are listening to is broadcasting
the program you have selected
The unit continues to receive the station but the indicator
of received PTY code starts flashing.
«
When the program is over, “EON END” appears on the
display, and the indicator of received PTY code stops
flashing and remains lit, but the EON function still
remains activated.
PTY SELECT EON SELECT
Canceled
TA NEWS INFO
OFF
(Canceled)
More about the EON function
• The EON data sent from some stations may not be compatible
with this unit. In this case, the EON function may not work
correctly.
• While listening to a program tuned in by the EON function, the
station does not change even if another network station starts
broadcasting a program of the same EON data.
• The EON function is canceled when you change the source to CD,
TAPE, or MD/AUX, while it is temporarily canceled when you
change the source to AM (MW/LW).
PTY
/EON
PTY
/EON
RDSEONTA
(See page 12.)
EN01-13.UX-P7R[B] 01.3.14, 1:27 PM13