JVC SP-UXP7 Playing Back CDs CD/CD-R/CD-RW, Playing Back the Entire CD Normal Play, Press CD 3/8

Playing Back CDs (CD/CD-R/CD-RW)

Continued

This unit has been designed to playback the following CDs:

•CD

•CD-R

•CD-RW

Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit.

General Notes

In general, you will have the best performance by keeping your CDs and the mechanism clean.

•Store CDs in their cases, and keep them in cabinets or on shelves.

•Keep the unit’s disc tray closed when not in use.

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played back only if they are already “finalized.”

•You can play back your original CD-Rs or CD-RWs recorded in music CD format. (However, they may not be played back depending on their characteristics or recording conditions.)

•Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

•Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

•CD-RWs may require a longer readout time. (This is caused by the fact that the reflectance of CD-RWs is lower than for regular CDs.)

3 Press CD 3/8.	CD
The disc tray automatically closes and the first
track of the CD starts playing.
Track number	Elapsed playing time

•The CD automatically stops when the last track of the CD has finished playing.

To stop playing, press 7.

Total track number Total playing time

To remove the disc, press CD 0on the remote control (or 0 on the CD player section).

•If the CD cannot be read correctly (because it is scratched, for example)

“00 0000” appears on the display.

•If no CD is inserted

“NO DISC” appears on the display.

•If an unreadable CD-R or CD-RW is inserted “BLANK CD” appears on the display.

DO NOT try to open or close the CD tray by hand as it will be damaged.

Playing Back the Entire CD — Normal Play

1 Press CD 0 on the remote control	CD
(or 0 on the CD player section).
The unit automatically turns on and the disc
tray comes out.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

CORRECT INCORRECT

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

Basic CD Operations

While playing a CD, you can do the following operations.

To stop playing for a moment

Press CD 3/8.	CD
While pausing, the elapsed playing time
flashes on the display.

To resume playing, press CD 3/8again.

To go to another track

Press MULTI KEY > / MULTI KEY < or MULTI KEY

¢/ 4repeatedly before or during playback.

• MULTI KEY > or ¢ :

Skips to the beginning of the next or succeeding tracks.

• MULTI KEY < or 4 :

Goes back to the beginning of the current or previous tracks.

To locate a particular point in a track

During play, press and hold ¢or 4.

•¢ : Fast-forwards the tracks.

•4 : Fast-reverses the tracks.

– 14 –