Thank you for purchasing this JVC product. Please read these instructions carefully before starting operation to be sure to obtain optimum performance and a longer service life from the unit.
CONTENTS
Features | 1 |
Handling precautions | 1 |
Connections | 2 |
Power supply | 4 |
Names of parts and their functions | 5 |
Remote control unit | 6 |
Switching the power on/off | 6 |
Volume, tone and other controls | 7 |
Handling CDs | 7 |
Playing CDs | 8 |
FEATURES
●
●Active
●
●
●
●Programmed play of up to 20 tracks
●Repeat Play
●Random Play
●
●Auto tape select mechanism
Handling cassette tapes | ......................................... 10 |
Cassette playback | 10 |
Radio reception | 11 |
Recording | 12 |
Clock adjustment | 13 |
Timer operations | 14 |
Maintenance | 16 |
Troubleshooting | 16 |
Specifications | Back page |
●Metal (type IV) and CrO2 (type II) tape can be played back for supe- rior tone quality
●CrO2 (type II) tape recording capability
●
●Seek/manual tuning
●Auto preset tuning
●Timer/Clock function
●Timer on/off with preset volume function
●Sleep timer can be set for up to 120 minutes
HANDLING PRECAUTIONS
Do not use this unit in direct sunlight where it would be exposed to high temperatures above 40°C (104°F).
1.Avoid installing in the following places
●Where it could be subject to vibrations.
●Where it is excessively humid, such as in a bathroom.
●Where it could be magnetized by a magnet or speaker.
2.Pay attention to dust
Be sure to close the CD holder or CD tray so that dust does not collect on the lens.
3.Condensation
In the following cases, condensation may occur in the unit, in which case the unit may not operate correctly.
●In a room where a heater has just been switched on.
●In a place where there is smoke or high humidity.
●When the unit is moved directly from a cold to a warm room.
In these cases, set the 
button to STANDBY and wait 1 or 2 hours before use.
4.Volume setting
CDs produce very little noise compared with analog sources. If the volume level is adjusted for these sources, the speakers may be damaged by the sudden increase of output level. Therefore, lower the volume before operation and adjust it as required during play.
5.Safety mechanism
This unit incorporates a safety interlock mechanism which switches the laser beam on and off, so that when the CD holder or CD tray is open, the laser beam stops automatically.
6.Do not place cassette tapes, etc. near the speakers
Since there are magnets in the speakers, do not place tapes or mag- netic cards on them as recorded data could be erased.
7.Keep this unit away from your TV
When this unit is used near a TV, the TV picture could be distorted. If this happens, move this unit away from the TV. If this does not correct the situation, avoid using this unit when the TV is turned on.
8.Cleaning the cabinet
If the cabinet gets dirty, wipe it with a soft, dry cloth. Never use benzine or thinner as these could damage the surface finish.
9.When listening with headphones
●Do not listen at high volumes as this could damage your hearing.
●For safety, do not drive while listening to this unit.
1
