Timer recording of broadcast, Timer playback, Operations

Timer recording of broadcast

●The current time must be set before the timer can be used.

●Make sure that the safety tabs of the cassette have not been broken off.

Operations

STANDBY

VOLUME	COMPACT
	DIGITAL AUDIO
AUX
MICRO COMPONENT SYSTEM UX-T550
A U T O T A P E S E L E C T O R

ACTIVE HYPER	TIMER/SNOOZE
BASS PRO	TIMER/SNOOZE
	CLOCK
ONE TOUCH		BAND
REC
AUTO REVERSE	TAPE	TUNER	CD

MULT

JOG

OPEN

~Set the button to ON. Ù Load a cassette.

●Insert the cassette with the side to be recorded facing out.

●Select the required reverse mode. ( or )

!Set the timer. (Refer to “Setting the timer” on page 14.)

●Set the timer about a minute before the broadcast to be recorded is scheduled to start.

ÚTune to the station to be recorded. (Refer to page 13.)

@ Set the button to STANDBY.

●Timer recording will start at timer start time and the power will be switched off at timer stop time. (The timer mode is then re- leased.)

●To cancel timer operation

Press the TIMER/SNOOZE button for more than 2 seconds so that the timer mode indicator () goes out.

If you do this, timer recording will not start at the timer start time.

Notes:

Once the timer has been set, the start and stop times, etc., are stored in memory. When timer recording or playback is required at different times, the timer must be set again.

●After setting the timer start and stop times, check that the tuner is tuned to the required frequency.

●When the power cord is disconnected or there is a power failure, timer settings will be erased from memory. If this happens, set the current time and perform the timer setting again.

Timer playback

●Timer playback of tapes, broadcasts and CDs is possible.

Operations

STANDBY

VOLUME

COMPACT

AUX

		DIGITAL AUDIO
MICRO COMPONENT SYSTEM UX-T550
A U T O T A P E S E L E C T O R
ACTIVE HYPER	TIMER/SNOOZE
BASS PRO	TIMER/SNOOZE
	CLOCK
AUTO REVERSE
ONE TOUCH		BAND
REC
	TAPE	TUNER	CD

MULT

JOG

OPEN

~Set the button to ON.

ÙSet the timer. (Refer to “Setting the timer” on page 14.)

Source sound	Timer mode	Operations

CD play	CD	Load a disc.

Tape playback	TAPE	Load a cassette tape.
	TAPE

Broadcast	TUNER	Tune to the required station.

!Set the button to STANDBY.

●Timer playback will start at the timer start time and the power will be switched off at the timer stop time.

The unit remains in the same timer mode even after the power is switched off. The same timer function will repeat at the same time on the following day.

●When the power is switched on, it is possible to fade in the sound from volume level 0 (zero) to the preset volume.

●To cancel timer operation

Press the TIMER/SNOOZE button for more than 2 seconds button so that the timer mode indicator () goes out.

Notes:

●When the volume setting is set to “VOLUME -” (volume level is not specified), the timer playback volume is set to the level used before setting the timer.

●To stop during timer playback, press the button to switch the unit off.