For customers using DVD Burner (sold separately)
Back-Up Hi-Definition Images
(Easy and correct way of copying to a DVD)
1. Get ready a recommended disc
Please use the recommended discs stated below.Using discs other than those recommended may cause problem when copying to the DVD and when playing back the DVD.
Recommended discs
|
| |||
|
| |||
|
|
|
| |
Brand | JVC | JVC |
| JVC |
| TDK |
|
| Verbatim |
| Verbatim |
|
|
|
| SONY |
|
|
|
•Recording and playback may not function properly if the recording side is scratched or dirty.
2. Set up each device before copying
DVD Burner3
USB cable1 | 4 |
|
2
1Connect the USB cable provided with DVD Burner (CU-VD40/CU-VD20)
2Turn on the DVD Burner
After turning on the power, wait for approximately 20 seconds before proceeding to step 3 .
The burner may not function properly within this 20 seconds.3Turn on the camera (GZ-HD3)
4Insert a new recommended disc into the DVD Burner
3. Copy all images to the DVD
Perform operations on the camera.(Camera’s LCD screen display)1Confirm that the display on the right appears on the LCD screen of the
camera (GZ-HD3)
2Select “NORMAL BACK-UP”
1 Select(move up and down)2 Confirm(press down)3 Select “ALL”
1 Select
(move up and down)
2 Confirm
(press down)
4Select “EXECUTE AND FINALIZE”
1 Select
(move up and down)
2 Confirm
(press down)
IMPORTANT | “Copy in progress” screen | |
• Playback is not possible if the disc is not | ||
| ||
finalized. |
| |
• Wait for the “copy in progress” screen on the |
| |
right and the “hourglass” mark to disappear, |
| |
then turn off the power and disconnect the USB |
| |
cable. |
| |
5 Exit |
|
(press down)
Copying completed!
NoteNext, operate the camera | There are other ways of copying which includes copying only the desired files. |
• For details, refer to the instruction manual of the camera |