DIVISION 28 ELECTRONIC SAFETY AND SECURITY
PART 2 PRODUCTS
2.01 INTERNET PROTOCOL CAMERA
Specifier Note: The following specification is for a common camera with two different housing options. Differences will be noted by part numbers and enclosed with [brackets]. Select the appropriate camera/housing combinations and delete the specifications for the remaining camera/lens combination.
A.Manufacturer:
1.JVC Professional Products Company Division of JVC AMERICAS CORP.
1700 Valley Road, Wayne, NJ; (800)
B.General:
1.Provide Internet Protocol (IP) camera with simultaneous (Dual Codec Stream) distribution of
2.One third inch 2.1 mega pixel CMOS
3.Resolution: Dual Resolution
a.MJPEG:
1.1280 x 720
2.640 x 480
3.320 x 240
b.H.264/AVC High Profile
1.1280 x 720
2.640 x 480
3.320 x 240
c.
1.640 x 480
2.320 x 240
4.Provide Power over Ethernet (PoE)
5.
Specifier Note: There are no industry standards for testing or determining Scene Illumination, or Sensitivity. Light source, scene reflectance, lens type and aperture opening all play a critical role is determining sensitivity (LUX) of a camera. Prior to selecting and specifying cameras you are encouraged to perform a side by side comparison with all variables being equal between cameras. Contact your JVC Representative for further information.
6.Scene illumination:
a.Color Mode:
1. 0.5 lx, f1.2
7.Clear Logic Video Intelligence- Including Advanced Wide Dynamic Range,
8.Sensitivity Adjustment (Sense Up):
a.Off
b.x2 ~ x60
9.Back Light Compensation: On/Off
10.White Balance:
© Copyright 2011 Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
5 of 11
VN_H217U/VPU_V.1_00
